  |
 Latency & Buffer Issues--motu & G4, need settings help |
 mar. 21 févr. 2006, 21:17
Message
#1
|
|
 Newbie Groupe : Members Messages : 4 Inscrit : 21 févr. 06 Lieu : Lakeland - US Membre no 77,203  |
Hey everyone, I'm new here, and this seemed like the closest area for the subject matter, so here goes...
I have an old G4 dual 450 mhz, running tiger. I use it exclusively for DP 4.6. The audio hardware is a motu 24i based off of the 324 card. I am having really bad latency issues when tracking. I have to go to hardware driver setup and take the buffer down to like 64 just to make it tolerable. When I mix, I have to go back and reset it to 1024. My machine has 2 gigs of ram (maxed out) and I'm using 2 hard disks (one system, one audio data). My machine has tracked all 24 simultaneously without any problems, but when I try to record one track while playing back as little as 4 previous tracks, it tells me that the operation has exceeded playback capability. I'm new to DP, motu, and macs...this was just my first step towards a halfway-decent DAW setup. Is there anything else I can do to fix the problem? Cuemix is not compatible with a 324 system under OS X. Is there anything I can do without spending more money right now? |
 |
 
|
 mer. 22 févr. 2006, 01:23
Message
#2
|
|
 Moderator In Chief (MIC)  Groupe : Editors Messages : 15,189 Inscrit : 23 déc. 01 Lieu : Paris - FR Membre no 2,758 |
I think you should bounce a bit, it'll help. right now you ask the drive to read 24 tracks and write another one, it may be the limit in your case…
-------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
|
|
mer. 22 févr. 2006, 05:42
Message
#3
|
|
|
Newbie Groupe : Members Messages : 4 Inscrit : 21 févr. 06 Lieu : Lakeland - US Membre no 77,203 |
it will have playback problems if I try to record one track even with as little as 3 or 4 existing tracks...it should be able to handle WELL beyond that load, right? I mean, that's with no plugins active or anything...just straight audio playback and record.
|
|
|
|
|
mer. 22 févr. 2006, 14:08
Message
#4
|
|
 Advanced Member  Groupe : Members Messages : 495 Inscrit : 12 oct. 01 Lieu : Chandler - US Membre no 2,003 |
Yes, you should be able to handle well beyong that load. I had a huge latancy issue with the 828. I canot remeber how I got rid of it. Have you tried using AudioDesk 2.xx that came with the MOTU? Also running at 24 bit 96kHz may be a bit taxing.
-------------------- kaboombahchuck
------------------------------------------------------------------------------- |
|
|
|
|
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
