Motu 828 & Firewire, My powerbook doesn't recognize the unit! |
lun. 10 oct. 2005, 23:55
Message
#21
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 06 sept. 05 Lieu : Beaumont - US Membre no 69,626 |
i thought repair permissions was a good idea as I had not tried that. No luck. The unit is a piece of junk. I am NOT sold on MOTu and will steer away from the company in the future. Their customer support is the worst I've seen in my 58 years...
Sad... 828 showed great promise. It's a shame MOTU doesn't. --WD |
|
|
mar. 11 oct. 2005, 01:41
Message
#22
|
|
Moderator In Chief (MIC) Groupe : Editors Messages : 15,189 Inscrit : 23 déc. 01 Lieu : Paris - FR Membre no 2,758 |
There's been a deadbeat serie in the 828 with problems, but MOTU has always repaired/exchange the faulty rack. Now they are certainly not the fastest customer support nor the most communicative but their interfaces are of the best stuff you can buy in the middle to pro range.
OOPS i said something positive about MOTU… Ah, and the Windows drivers usually s…k big time. But we don't care Now, simply, have you trashed the 828 preferences (someone had a strange problem on the French side and it did the trick on a 896)? -------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
mar. 11 oct. 2005, 14:34
Message
#23
|
|
Junior Member Groupe : Members Messages : 114 Inscrit : 02 août 02 Lieu : BURBANK - US Membre no 6,512 |
Another trick you might try is to reset your 828mkII to factory defaults. This has worked for me several times on my 828mkII.
DANO10 |
|
|
dim. 6 nov. 2005, 22:01
Message
#24
|
|
Newbie Groupe : Members Messages : 3 Inscrit : 24 janv. 03 Lieu : Brussels - BE Membre no 11,082 |
hello,
just a hint; i encountered similar problems with my MOTU 828 today and i installed the new drivers (under Tiger 10.4.3) 1.2.5; i first selected the custom install since i do not have the traveller > didn't work; i uninstalled everything and started again with the standard installation and now everything works well. maybe this can help. Good luck! |
|
|
mar. 8 nov. 2005, 14:14
Message
#25
|
|
Advanced Member Groupe : Members Messages : 495 Inscrit : 12 oct. 01 Lieu : Chandler - US Membre no 2,003 |
You know there is a lesson here.. Buyer beware! And I don't nesseceraly mean the brand either. Buying used gear is always a crap shoot. It's always best to save more money for a new product, tha to lose alot of time over a used one... an incoplete one at that.
BTW My 828mkii works flawlessly (except when it comes to user error, then.. head ache time!) -------------------- kaboombahchuck
------------------------------------------------------------------------------- |
|
|
mar. 15 nov. 2005, 02:11
Message
#26
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 15 juin 04 Membre no 45,153 |
Just an update on my last post. I have been sitting on my 828 and have not yet sent it in to MOTU to get repaired.
I wanted to check it out on another computer first. I tried it out the other day on my friend's PC. We installed the drivers and plugged the unit in and it worked flawlessly. So, wtf? Apparently it's NOT a problem with the 828 and I know it's not a problem with my mac. I don't know anymore. I might just get an mbox and be done with it. |
|
|
ven. 9 juin 2006, 21:37
Message
#27
|
|
Newbie Groupe : Members Messages : 1 Inscrit : 09 juin 06 Membre no 80,453 |
This may be a little old, but this is what I had to go through.
Got a brand new 828 mk1 a few years ago. One day it stopped being recognized by every machine. Sent it back to Motu. They returned it. Then, for a few days it worked until it did the same. I got a mk11 since then, but I still wanted my mk1 to work. I tried daisy chaning it to the mk11 and it worked. but now it has stopped again. It must be the drivers. ugh!! I hope someone solves this |
|
|
mer. 21 juin 2006, 00:28
Message
#28
|
|
Moderator In Chief (MIC) Groupe : Editors Messages : 15,189 Inscrit : 23 déc. 01 Lieu : Paris - FR Membre no 2,758 |
More likely it's something inside which behaves erratically… And not all units are concerned so for the mk1 it's a bit of a heartbreak.
-------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
jeu. 9 nov. 2006, 08:23
Message
#29
|
|
Newbie Groupe : Members Messages : 1 Inscrit : 09 nov. 06 Lieu : San Francisco - US Membre no 85,101 |
Try un-installing it using the installer application by selecting the install type to uninstall and then re-install it if that doesnt fix it go to www.macupdate.com and look for the motu firewire and it should give you motu firewire update 1.4.1, this fixed it for me which was weird since it looked like the same regular 1.2.5 installer but something in it fixed the problem.
hi, i'd really like a followup on this. what happened when you sent it off? i have just experienced the same exact symptoms, except my tibook has killed TWO 828's this week alone! i KNOW its not the firewire port... my personal guess is that their new driver f'd up the firmware, and for all intents and purposes my life, as i have ABSOLUTELY NO WAY TO RECORD ANYTHING NOW, save the lovely line in on the back of the powerbook... please, anyone with an original 828, DO NOT DOWNLOAD THIS DRIVER. DO NOT GO TO TIGER. YOU WILL DIE.
*absolutely f'n out for blood* -kimsystem |
|
|
3 utilisateur(s) sur ce sujet (3 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :