 Sound Inferface For A Camcorder |
 ven. 30 juil. 2004, 12:34
Message
#1
|
|
 Rookie  Groupe : Members Messages : 36 Inscrit : 14 mai 04 Lieu : Indianapolis - US Membre no 43,223  |
I like to video tape concerts (with band permission) as well as audio recording at concerts. With my video tape the sound is too loud for the camcorder microphone so I end up clipping. What suggestions do you have as to how I can get good sound on the camcorder? It's a Sony TRV22.
I have been recording in with my minidisc and then running out the headphone out through an attenuator cable into the mic in on the video camera. The problem there is that my connections are not real clean and I often end up with a lot of static on one channel of the audio on the video tape. |
 |
 
|
 |
Réponse(s)
|
dim. 1 août 2004, 04:48
Message
#2
|
|
|
Rookie Groupe : Members Messages : 36 Inscrit : 14 mai 04 Lieu : Indianapolis - US Membre no 43,223 |
At the shows I don't have access to the sound board, plus the band has to be really well mic'd for it to sound worth anything. The primary person I record it wouldn't really work very well. Ambient recording is the only option and it's better.
|
|
|
|
Les messages de ce sujet
boilerblues Sound Inferface For A Camcorder ven. 30 juil. 2004, 12:34
td3k What about patching a line level out [tape out pos... ven. 30 juil. 2004, 14:19 dasasoul the IMIC (USB)it is a pre amp. $35 will clan ... ven. 30 juil. 2004, 20:45 boilerblues The iMic doesn't appear to have a compressor. ... ven. 30 juil. 2004, 21:22 fabulousray Plug into an open sub out in the sound board (each... dim. 1 août 2004, 00:26 jerviswest You need a BeachTek DXA-4 DV camera adapter
Regar... dim. 1 août 2004, 06:14 Riverdog Another answer can be to use a simple mic pre-amp ... dim. 29 août 2004, 22:05 Riverdog EPP! I spoke too soon...!
jerviswest - Yo... dim. 29 août 2004, 22:08 boilerblues I've tried syncing my video with my minidisc a... lun. 30 août 2004, 13:12
Presto Thanks for the tip jerviswest. The dxa6 seems appr... lun. 30 août 2004, 21:03 |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
