MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
Bienvenue invité
> Mbox Or Firewire Interface, confusion on which way to go
digikid
posté lun. 1 mars 2004, 14:46
Message #1


Newbie


Groupe : Members
Messages : 10
Inscrit : 01 mars 04
Lieu : Marietta - US
Membre no 37,304




I've had an MBOX for close to a year and a half now. Everything was fine until I got a new Powerbook G4 1.25 The MBOX has never been so troublesome. I'm running Panther 10.3.2 (part of the problem I'm sure).From high pitch bursts of white noise to not recording properly, i've just had it up to my eyeballs with the thing. I'm anxious to see the new Edirol FA-101, which seems to be much better than the M-Audio Firewire 410, but am I fine with what I have? It seems that the issue is software related, but I'm tired of waiting on
Pro tools Le 6.2.3. I just want to keep moving and get results. I'm really spinning wheels here. blink.gif

Ce message a été modifié par digikid - lun. 1 mars 2004, 14:49.
Go to the top of the page
 
+Quote Post
 
Start new topic
Réponse(s)
lushbudget
posté lun. 8 mars 2004, 15:28
Message #2


Rookie
*

Groupe : Members
Messages : 29
Inscrit : 28 déc. 03
Lieu : Gulfport - US
Membre no 31,952




Howdy,
I have the same setup with the exception that my PBook is a Titanium 867Mhz, and I have similar problems with MBox. Notwithstanding the fact that my cat chewed on one of the pots, the MBox seems to work fine in monitor mode with the output switched all the way over to PLAYBACK (which is the signal coming back from the computer only). So using that as an index for what should be going to disk I start recording, usually guitar and vox, and LO AND BEHOLD! my recordings have white noise through and through! I've tried using the T-Racks EQ that came with the MBox bundle and I can isolate some of the noise, but not all (there is still that eternal hum) and I'm a little bummed - I thought I could create listenable, or at least Demo quality recordings with Mbox and the software bundle.
Updated to PTLE 6.2.3 and no change.
Tried patching the Mbox in thru a USB 2 PC card (that I use for my DVD-RW drive) and lost the hum and gained these crazy bursts of feedback sounding stuff Hum was better!
Tried running the Mbox through a self-powered USB hub and that was a complete failure! Latency went through the roof and 1/2 the time software couldn't even see the Mbox!
I'm hoping that an answer exists, but I'm betting that if I want to make solid, rock-ready recordings for folks to listen on, then I'm going to need to invest in some Firewire gear (like MKII 828 or the like)
Any suggestions as to how I can tweak my Mbox?
Any interest in buying a slightly used, slightly chewed on Mbox?

Ce message a été modifié par lushbudget - lun. 8 mars 2004, 15:29.


--------------------
lushbudget productions, ltd.
www.lushbudget.com
PowerMac G5 dual 2 Ghz, 2Gb RAM, 160Gb & 200Gb HD's, Apple 20" Cinema Display
PowerBook G4 Titanium 867Mhz, 1Gb RAM
Digidesign Mbox - Lacie FW 4/800/USB2 160Gb External HD
ProTools LE 6.4, Logic Express 7.0.1, Reason 2.5, Live 3, SampleTank 2, Amplitube, Arturia MiniMoog & CS-80V, Waves Musicians Bundle 4.0.
[SIZE=1][COLOR=blue][B]
Go to the top of the page
 
+Quote Post



Reply to this topicStart new topic
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Version bas débit - mercredi 9 avril 2025, 13:07
- © MacMusic 1997-2008