 Reason Rewired To Pro Tools |
 lun. 9 févr. 2004, 20:19
Message
#1
|
|
 Newbie Groupe : Members Messages : 18 Inscrit : 27 avril 03 Lieu : Worthington - US Membre no 16,835  |
setup: ibook g4 800, 640mb, 60gig, osx 10.3
mbox, pro tools le 6.2 problem: i'm trying to get redrum beats into pro tools and when i set up reason within pro tools rewire appears to be working, because hitting play in pro tools transport window plays reason beat. However, when i record enable the track, and hit play to record, green signal light drops out, beat continues to play, but recorded segment contains no audio or waveform, just a straight line. There has to be a way to get this to work because the reason disc came with the mbox, and reason is listed as a plug-in in pro tools. Also, I can't seem to import any audio to pro tools either. I tried doing it this way, but every file I select, even .wav files are apparently unreadable by pro tools. Thanx for the help. |
 |
 
|
 |
Réponse(s)
|
lun. 9 févr. 2004, 20:33
Message
#2
|
|
|
Newbie Groupe : Members Messages : 15 Inscrit : 12 sept. 02 Lieu : Rupelmonde - BE Membre no 7,573 |
I had the same problem, but was able to fix it after reading this in the Reason Adapted support pages:
"This is a Pro ToolsReWire implementation issue. The Loop Points have to be set up in Pro Tools. It's not possible to set these up in Reason Adapted when ReWired to Pro Tools. Go to Pro Tools and set up the Loop points. Reason Adapted will register the positions of the Loop points set up in Pro Tools." Hope that helps |
|
|
|
Les messages de ce sujet
meadows.83 Reason Rewired To Pro Tools lun. 9 févr. 2004, 20:19
Blamm Perhaps someone else will chime in about whether o... lun. 9 févr. 2004, 20:35 |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
