![]() |
![]()
Message
#1
|
|
Groupe : Messages : 0 Inscrit : -- Membre no 0 ![]() |
hi
i just installed the driver for the M-Audio Quattro USB audio interface. I know this device is a piece of shit, but since I just switched to OS X I thought I'd give it a last try. There is no documentation whatsoever with the driver (which is in beta) and I can't find anything on the web. Does anyone have a clue? thanks! |
|
|
![]() |
Réponse(s)
![]()
Message
#2
|
|
![]() Junior Member ![]() ![]() ![]() Groupe : Members Messages : 165 Inscrit : 12 janv. 01 Lieu : Brussels - BE Membre no 183 ![]() |
it should also work on the same usb bus.
![]() but only if the driver/hardware are good! FYI, midi doesn't eat bandwith: it work perfectly on (old) serial buses which are really slower than USB If you get into troubles only with MIDI, you should buy an inexpensive SteathPort ($50) and add a serial (reliable) midi interface like thoses from motu, emaic, midiman etc... BTW, the small midiman USB interfaces work very well HTH -------------------- Prutulz
RTFM... is usually not enough |
|
|
Les messages de ce sujet













![]() ![]() |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
