 Mbox And Internal Gain, boosting my computer's input gain |
 sam. 4 oct. 2003, 16:33
Message
#1
|
|
 Newbie Groupe : Members Messages : 7 Inscrit : 24 août 02 Lieu : Dallas - US Membre no 7,094  |
Hi, all...
I'm running Pro Tools LE on a B&W G3 300mhz. The Digidesign Mbox is my sound input device. My problem is that, as far as I can tell, the only way to adjust input volume is manually with the Mbox's built in pre-amps. The Mbox seems to override the computer's input gain control, or, maybe more accurately, it runs independent of the input gain control. So... I have two questions... does anyone know how to adjust the "input" gain WITHIN the Pro Tools software? Or... does anyone know of a third party plug-in that allows you to adjust the computer's input gain... or the Pro Tools input gain within the software? I've got a low output mic (a Beyer Dynamic M500), and the pre-amp is just working too hard... and so I'm getting an unacceptable amount of hiss. Need help if anyone has it to offer! thanks!!! Douglas Dallas, TX |
 |
 
|
 |
Réponse(s)
|
lun. 13 oct. 2003, 15:23
Message
#2
|
|
|
Newbie Groupe : Members Messages : 17 Inscrit : 29 août 03 Lieu : Lindenhurst - US Membre no 23,831 |
hey was going on. I to at one point had a an m box and never had the porblem you are talking about but from what you said i would suggest possibly just going to whatever tracks are giving you alot of hiss and use the audio suite plug in "gain" and cut the gain a bit......hope this helps....later
--jay-- |
|
|
|
Les messages de ce sujet
deepcoffee Mbox And Internal Gain sam. 4 oct. 2003, 16:33
Synthetic check the hardware setup form pull down menus in P... dim. 12 oct. 2003, 21:40
 |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
