 Running PT LE and DP3 together on G4 |
 jeu. 13 juin 2002, 20:16
Message
#1
|
|
 Newbie Groupe : Members Messages : 4 Inscrit : 13 juin 02 Lieu : Huntington Beach Membre no 5,088  |
I'm curious if anyone out there is running Digital Performer 3 and the Digi 001 ProTools LE together on the same machine. I'm building my setup, and that's the way I've been thinking. I have the dual gig G4, DP3, Motu's Time Piece AV - so I figure I'm pretty set on composing for MIDI. I'm saving for the Digi 001 (for tracking audio) and for the second Mac monitor (the idea being, one program for each screen). Have any of you gone the same or similar route? Run into any problems (with syncing or anything else)? Anything I should be concerned with? Thank you.
|
 |
 
|
 |
Réponse(s)
|
ven. 14 juin 2002, 19:46
Message
#2
|
|
 Junior Member  Groupe : Members Messages : 165 Inscrit : 12 janv. 01 Lieu : Brussels - BE Membre no 183 |
This should be possible (not tested, just guessing)
- Sync PD3 (slave) to PT (master) via MTC (if PT LE can do this) (you need an IAC driver in OMS to do that, and have freeMidi in DP3 to emulate OMS.) - Disable audio support in DP (at least disable any link to the Digi001 card) It may work! 
-------------------- Prutulz
RTFM... is usually not enough |
|
|
|
Les messages de ce sujet
zwallace Running PT LE and DP3 together on G4 jeu. 13 juin 2002, 20:16
MrT I have PT LE 5.1.1 +001 and DP3 + 2408 , both inst... ven. 14 juin 2002, 08:53 prutulz did you try to uncheck 'play audio in the backgrou... ven. 14 juin 2002, 13:26 zwallace Thanks for the input. My idea is to run both appl... ven. 14 juin 2002, 17:47
MrT OK, I was pretty confused by Prutulz's first post.... ven. 14 juin 2002, 20:02 |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
