![]() |
![]()
Message
#1
|
|
![]() Newbie Groupe : Members Messages : 1 Inscrit : 02 mai 04 Lieu : Vilnius - UK Membre no 42,319 ![]() |
Hi
I've been surfing the net to find a USB MIDI interface which will work with my Intel iMac using 10.5. I'm a bit confused and would welcome any advice. I would like to connect my Yamaha PSR 550 to the Mac and use Garageband. I also have an acoustic guitar and would like to buy a mic and also be able to connect this and also record vocals. I think I need a 'condensor' mic for this? So in short, I need a USB Midi device with Mic for vocal (and mic for acoustic guitar without a pickup), and Midi input. I would rather spend a bit more on something with all these features than a 1 MIDI in/ 1 MIDI out cheapo wire, but I don't want to end up paying for things I will never use as a beginner amateur. I've seen some bad feedback on some models which don't yet have drivers for 10.5. Can anyone help recommend some hardware?! Thanks in advance. Hannah |
|
|
![]() |
Réponse(s)
![]()
Message
#2
|
|
![]() Member ![]() ![]() Groupe : Members Messages : 56 Inscrit : 10 juil. 05 Lieu : San Francisco - US Membre no 67,641 ![]() |
When it comes to MIDI, you do not need anything with firewire. MIDI is just data, and extremely light on the processor and baud rate / transfer. There is virtually no "conversion" needed. Edirol makes good, inexpensive interfaces for handling MIDI data. One thing I would recommend to anyone with multiple USB devices is a powered hub. Belkin has then for about 30 - 50 bucks. They are invaluable for the rest of your gear, as a 2.0 USB hub is usually a designated port ( ie, if you have 2 USB ports, usually only one of them is high speed ( 2.0 ) , and the other is not . . . so getting all your gear in to your computer can be a hassle without a powered hub. Not to mention, some USB devices require more power than others, so a non-powered HUB with 3-4 USB devices plugged into it can cause gremlins to creep in to your system during play. . . just more food for thought . . .
|
|
|
Les messages de ce sujet










































![]() ![]() |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
