440 Forums > English > Mac Music > Audio, MIDI, DSP Cards and Interfaces, Controllers > Other Controllers, Interfaces, DSP Cards Cv To Midi ?, (not MIDI to Control Voltage) |
 ven. 15 févr. 2008, 07:09
Message
#1
|
|
 Newbie Groupe : Members Messages : 4 Inscrit : 24 mai 03 Lieu : Sebastopol - US Membre no 18,477  |
Could anybody give me some advice about converting CV from a Theremin into a MIDI controller?
There are lots of ways to convert MIDI to CV, but methods for going the other direction are hard to find. |
 |
 
|
 |
Réponse(s)
|
sam. 16 févr. 2008, 15:50
Message
#2
|
|
|
Newbie Groupe : Members Messages : 9 Inscrit : 29 janv. 08 Lieu : Schertz - US Membre no 98,454 |
I believe you could use the 1/4" input on a Roland GI-10 for that purpose. The GI-10 allows monophonic input received from a microphone or a guitar cable to be converted into midi. You can find the GI-10 used for about $100 to $150 on eBay. Since a guitar cable essentially sends a voltage for conversion into midi, it seems that the CV from a theremin ought to be able to be converted in the same manner.
|
|
|
|
Les messages de ce sujet
GreyOtter Cv To Midi ? ven. 15 févr. 2008, 07:09
lepetitmartien Maybe you could have a look here (I worked for the... dim. 17 févr. 2008, 15:49 |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
