![]() |
![]()
Message
#1
|
|
![]() Newbie Groupe : Members Messages : 15 Inscrit : 15 août 02 Lieu : DUBLIN - IE Membre no 6,879 ![]() |
I have a Dual Processor 500Mhz G4.
The only disc it will boot off is 9.0.4 I've tried booting off a 9.1 disc, an OSX (10 & 10.2) disc, Norton Utilities 6 disc. Even if I install 9.0.4 and try and upgrade to 9.1 - the mac crashes when I try to run the upgrade installer. Basically looks like this machine doesn't like anything above 9.0.4!! It runs fine under 9.0.4 with Logic 4.8.1, MOTU PCI-324, Adaptec 2940UW, MOTU MTP AV. I've stripped everything out of the machine, even swapped out the RAM as I heard this might be an issue. Back to the bare bones of Monitor, Keyboard, Mouse and 1 slot of RAM; no joy. I've used my OS CDROMs and borrowed discs from friends thinking my disks might be damaged so dodgy CD's are out of the question. HELP! |
|
|
![]() |
Réponse(s)
![]() ![]()
Message
#2
|
|
![]() Maniac Member ![]() ![]() ![]() ![]() ![]() ![]() Groupe : Members Messages : 899 Inscrit : 12 oct. 01 Lieu : Kirkland Membre no 2,002 ![]() |
When I upgraded from an 8600 to a G4/400 I had to ditch my 2940UW. It would not live with my audio and video cards. Especially my second ATI card for dual monitors.
I installed an IDE drive and all is well. Tested 50+ 16bit mono tracks. Check the Apple and Adaptec sites for more info. I was also under the impression that Adaptec was dropping Mac support. Try removing the 2490 and installing the OS. -------------------- G-Dub
|
|
|
Les messages de ce sujet





![]() ![]() |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
