![]() |
![]()
Message
#1
|
|
Newbie Groupe : Members Messages : 1 Inscrit : 13 août 07 Lieu : Baton Rouge - US Membre no 93,822 ![]() |
Bear with me on this one.
![]() I have my recording Mac Pro upstairs and my grand piano downstairs. I'm getting excellent sound in spite of 50' mic cables. I want to control the Mac Pro from downstairs at the piano. Is there a way to make the notebook mirror the pro? I already duel monitor with the pro so that shouldn't be a big deal making the book be the "other monitor", right? The other problem is that bluetooth won't work that far (or at least through the ceiling and a couple of walls) so, assuming there's no way to make the book control the pro, would I have to run 50' USB cables to a standard keyboard and mouse to operate the pro? Until I can afford the upstairs studio room expansion and have the 8' piano hoisted in, I need a work-around. ![]() Thanks, Kenny |
|
|
![]() |
Réponse(s)
![]()
Message
#2
|
|
![]() Junior Member ![]() ![]() ![]() Groupe : Members Messages : 122 Inscrit : 16 juil. 06 Lieu : London - UK Membre no 81,499 ![]() |
The way I see it you have two options:
1) Boot the MacPro in FireWire target mode. You would need a couple of firewire repeaters to maintain a good signal but you should be able to use the OS on the MacPro to boot the MBP and take charge of its hard-drives etc. 2) Network the two computers via ethernet. All this will allow you to do is to use the MP internal drives. This technique works very well. -------------------- www.myspace.com/commercialmusicstudios
|
|
|
![]()
Message
#3
|
|
![]() Junior Member ![]() ![]() ![]() Groupe : Members Messages : 142 Inscrit : 07 juil. 04 Lieu : - US Membre no 46,480 ![]() |
You can't use the MBP as a monitor for the mac pro.
chicken of the VNC http://sourceforge.net/projects/cotvnc/ You will be able to control the Mac Pro from the MBP. via your network. That should do the trick. since it's over your network , it's a bit laggy as compared to direct control. You could also use Apple Remote Desktop, which is built in to 10.5. -------------------- |
|
|
Les messages de ce sujet



![]() ![]() |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
