![]() |
![]() ![]()
Message
#1
|
|
Groupe : Messages : 0 Inscrit : -- Membre no 0 ![]() |
Hello,
I've got the following equipments: - an imac with Pro Tools Free and Logic AUdio running under OS 9.2.2, -a Yamaha DX7, - a Midisport UNO 1*1 Midi Interface - OMS 2.3.8 The Midi IN/OUT are OK but the issue is that I can't hear the DX7 on the Mac eventhought I connected its audio output to the audio input of the Mac? The audio output of the DX7 works perfectly when I connect it to my stereo so the problem must be related to the configuration of the sequencers (which is not so well explained in the manuals...). Thank in advance for your help! Bye, John |
|
|
![]() |
Réponse(s)
![]()
Message
#2
|
|
Groupe : Messages : 0 Inscrit : -- Membre no 0 ![]() |
Thanks for pointing this possible issue related to the plugs lengths.
I've got 2 similars adapters and there is no result with both. Since these are standard products I'm not really sure if this is really what I should focus on. As Synthetic previously mentionned, I'm quite sure it's a pb of signal levels, but why???!!!!! Apple computers are not expensive enough so that I should not need to invest in any audio card (I'm just talking about amateurs not professionals)? Well, I should borrow an audio interface in a shop and see if it comes from this lack....that would be the easiest way to solve the problem. |
|
|
Les messages de ce sujet









































![]() ![]() |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
