 Protools, Tascam Us 428. And A Mac |
 lun. 16 sept. 2002, 04:28
Message
#1
|
|
 Rookie  Groupe : Members Messages : 30 Inscrit : 27 juil. 02 Lieu : New York - US Membre no 6,291  |
Can I use ProTools with a Tascam US 428 and a PowerMac? If so, is ProTools ready for OS X?
I heard that in order to use ProTools, you have to also use DigiDesign hardware...so I am wondering if this is true...which means that I can't use my Tascam controller (US 428)?? 
|
 |
 
|
 |
Réponse(s)
|
lun. 16 sept. 2002, 20:46
Message
#2
|
|
|
Rookie Groupe : Members Messages : 30 Inscrit : 27 juil. 02 Lieu : New York - US Membre no 6,291 |
Thanks guys.
Yukulele, So I can probably assume that the free version of ProTools is very limited, just as the Cubasis version that comes with the Tascam is, correct? If that is the case, it's not worth getting. What kind of investment would I have to make in order to use the 428 with the middle of the road version of ProTools?...or are you saying that I would have to find some type of Digidesign interface to use as the controller and that the 428 is useless to me? Lastly, what software are you running on your US 428? Are you happy with it? |
|
|
|
Les messages de ce sujet
salparadise99 Protools, Tascam Us 428. And A Mac lun. 16 sept. 2002, 04:28
Yukulele It depends on which pro tools you're using (is... lun. 16 sept. 2002, 10:41 rickenbacker All ProTools versions are supposed to be OS X read... lun. 16 sept. 2002, 14:04 Synthetic except for ProTools FREE mentioned below... you re... lun. 16 sept. 2002, 21:17
Yukulele QUOTE (salparadise99 @ Sep 16 2002, 21:46)So ... lun. 16 sept. 2002, 22:18 |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
