![]() |
![]() ![]()
Message
#1
|
|
![]() Newbie Groupe : Members Messages : 16 Inscrit : 28 juin 05 Lieu : Calgary - CA Membre no 67,256 ![]() |
One and all: Give your suggestions for a good quality, affordable interface for the beginners of the world.
I'm new to comuter based music production and I plan to run Logic Express 7 on a new iBook w/ 768mb of Ram. I need recommendations on audio interfaces with at least two input channels, including a good mic input as vocals will be a priority, hopefully under $500. This set up is to be used for demo song/sellable cd production; the focus however is to produce usable tracks for later studio additions. All suggestions are apreciated. Thank you. Ce message a été modifié par OneDerBoy - ven. 15 juil. 2005, 22:06. |
|
|
![]() |
Réponse(s)
![]()
Message
#2
|
|
![]() Newbie Groupe : Members Messages : 4 Inscrit : 01 oct. 05 Lieu : Sunshine Coast - AU Membre no 70,731 ![]() |
Hi. I'm new here and this is my first posting. I have scoured the internet for reviews of appropriate audio/midi interfaces and have come to the conclusion that the Tascam US-122 and any m-audio products should be avoided at all costs.
I have come down to a choice between the Firebox and an Edirol FA-66. I know there are other choices out there, but these ones seem to get the most positive comments, though it's nearly impossible to find reviews of the FA-66. My question? I'm getting to it. I have just bought a 933MHz G4 which will handle either interface, but I also have a 550MHz PowerBook with 768Mb ram, which falls below the minimum requirement for both units. Could I use the Powerbook for editing the tracks after capturing the audio on the 933? Also, would I be able to use the PowerBook as my 'backing band' to play back the recordings if I got to the gigging stage? I make the assumption that the audio capture phase would be the most CPU intensive. Also, am I correct to understand that the Firebox can only record 2 inputs at the same time? I've read that the FA-66 can record 6 if your settings aren't too high. Sorry about the long post. |
|
|
Les messages de ce sujet















































![]() ![]() |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
