 Maxtor External Hds, HDs won't daisy chain |
 lun. 25 oct. 2004, 17:07
Message
#1
|
|
 Newbie Groupe : Members Messages : 3 Inscrit : 15 févr. 04 Lieu : Berlin - DE Membre no 35,906  |
Hi, I recently got a second Maxtor ext HD to chain with the older 5000 series HD. I've not activated the Retrospect Express app. My powerbook crashes when I plug them both in but both work on their own. However--on my iBook they daisy chain just fine. I assume there's a config issue in the powerbook- any advice on this? Thanks in advance from Bonzulu
|
 |
 
|
 |
Réponse(s)
 sam. 13 nov. 2004, 05:18
Message
#2
|
|
 Moderator In Chief (MIC)  Groupe : Editors Messages : 15,189 Inscrit : 23 déc. 01 Lieu : Paris - FR Membre no 2,758 |
I have 3 maxtors connected to now my G5, previously on my G3. the obvious reason can be the OS question, if you move the drives between OS 9 and OS X you are GOING TO HAVE TROUBLES
 Keep them in OS 9 or OSX only. Now, if it's not that. Check if the enclosures have not some firmware updates to make. try to use other cables (or swap them). Also: check the way you power them, start by powering the last on the chain first, then the next to last etc. -------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
|
Les messages de ce sujet
bonzulu Maxtor External Hds lun. 25 oct. 2004, 17:07
Synthetik If the OS is different on the Powerbook this might... ven. 12 nov. 2004, 20:30
 |
3 utilisateur(s) sur ce sujet (3 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
