 Clicks When Recording In Dp4.12, No satisfying hardware/device settings |
 dim. 3 oct. 2004, 21:19
Message
#1
|
|
 Newbie Groupe : Members Messages : 5 Inscrit : 03 oct. 04 Lieu : Amsterdam - NL Membre no 52,390  |
Dear all,
this is my first posting, so please be gentle...  Upgraded from dp3 to dp4 on an imac g4 800mhz. Recording voice with a usb-edirol-ua3d was fine in dp3. But in dp4 noise appeared in recorded voices, with the same hardware/device settings as in dp3. Messing around with buffers etc. has resulted in identifying two different kinds of noise: 'Clicks' every 5-15 seconds like a grain of sand on vinyl. Little 'crackling' sounds, constantly, more so on top of parts with higher amplitude. By playing with ALL the settings in 'Hardware' and 'Studio Configuration' I can either make the clicks or the crackling go away completely, but never the both of them. Am I forgetting something, some settings somewhere, some good old trick, some preferences. Or am I to return to dp3 and OS9? cheers, zimpy |
 |
 
|
Les messages de ce sujet
kaboombahchuck Most of the times this is a sign that you do not h... lun. 4 oct. 2004, 01:22 zimpy Thanks Kaboom,
There's 64+256Mb, and with oth... lun. 4 oct. 2004, 10:23 kaboombahchuck I have seen reports that 348 mb's is not enoug... lun. 4 oct. 2004, 11:19 zimpy 750 to 1 gig! ...ahum...
What's it doing w... lun. 4 oct. 2004, 14:14 zimpy Hey,
Finally was able to try 640Mbyte RAM on the ... mer. 27 oct. 2004, 20:43 lepetitmartien It's mainly a clock problem then…
Check if yo... jeu. 28 oct. 2004, 05:21 chappy most clicks, pops and motorboating sounds are cloc... jeu. 28 oct. 2004, 05:59 zimpy I'm only using this very basic edirol UA-3D US... jeu. 28 oct. 2004, 19:41 midimacguy You are running DP 4.12?
You've downloaded/in... lun. 1 nov. 2004, 02:08
chappy One device, the MOTU?, needs to recieve clock and ... lun. 1 nov. 2004, 02:18  |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
