  |
 M-audio-firewire 410/ Firewire Problem |
 ven. 26 août 2005, 21:24
Message
#1
|
|
 Newbie Groupe : Members Messages : 6 Inscrit : 23 août 05 Lieu : Ohio - US Membre no 69,040  |
Alrighty,so a couple weeks ago I purchased a 410 for my powermac g5 1.8 SP right out the box it did not work computer would not reconize it. I tried reinstalling the drivers numerous times and bought a new cable still nothing. Tech support suggested upgrading from 10.3.7 to 10.3.9. Before I did this I sent the 410 back and got a new one in the meantime I did the software upgrades.
I have never had anything else plugged into the computer that is firewire. The device does power I get the flashing blue light. When I go to the system profile I get no information for the device tree but only if the 410 is plugged in without it it's normal. The only thing I can think of is the firewire port on the computer is bad but I'm having a hard time comprehending that since it's new and I never used it before and it does power the device. Anyone got any advice before I lug the computer out to have the firewire tested? Similiar problem? Thanks. Ce message a été modifié par martiansrevenge - ven. 26 août 2005, 21:31. |
 |
 
|
|
ven. 26 août 2005, 21:38
Message
#2
|
|
|
Newbie Groupe : Members Messages : 6 Inscrit : 23 août 05 Lieu : Ohio - US Membre no 69,040 |
Oops, I just noticed I should of posted this in the card and interface forum. I'm gonna move it on over.
|
|
|
|
|
mer. 7 sept. 2005, 17:48
Message
#3
|
|
|
Rookie  Groupe : Members Messages : 36 Inscrit : 11 mars 04 Lieu : - CL Membre no 38,206 |
I am having other kind or problem ... the 410 worked at the start , but now , when I want to listen some music , theres no audio output, and a weird buzzle sound ( very low ) is what I hear... any ideas?
|
|
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
