![]() ![]() |
![]() |
![]()
Message
#1
|
|
![]() Newbie Groupe : Members Messages : 5 Inscrit : 21 juin 04 Lieu : Portsmouth - UK Membre no 45,557 ![]() |
Are phantom power and pre-amps seperate? I asked about why my AKGC1000S doesn't work on a previous topic and i was told that it needs a pre-amp and phantom power. The AKG C1000S claims that with a 9v battery, you don't need phantom power. Do i still need a pre-amp then? And.... why?
Help is much appreciated. Adam Casciaro |
|
|
![]()
Message
#2
|
|
![]() Rookie ![]() Groupe : Members Messages : 36 Inscrit : 14 mai 04 Lieu : Indianapolis - US Membre no 43,223 ![]() |
Yes, a preamp and phantom power are two different things. Phantom power provides power for the microphone to be able to pick up sound. Preamps take the sound that a microphone picks up and amplifies them to a level that a computer, recording device, or mixing board can work with. On your AKG's if you put in the 9 volt batteries that is your phantom power, or you can use them with an interface that provides phantom power. But you will need a preamp in addition to the phantom power.
|
|
|
![]()
Message
#3
|
|
![]() Newbie Groupe : Members Messages : 5 Inscrit : 21 juin 04 Lieu : Portsmouth - UK Membre no 45,557 ![]() |
Thankyou very much, you've been very helpful. It's so incredibly hard for me to find any information online which patronises. Sometimes, we all need to be patronised just a littl bit... (when beginning).
Adam Casciaro |
|
|
![]()
Message
#4
|
|
![]() Rookie ![]() Groupe : Members Messages : 36 Inscrit : 14 mai 04 Lieu : Indianapolis - US Membre no 43,223 ![]() |
The Fender Discussion Page is a great place for a lot of helpful info, it's a pretty busy forum and lots of great people.
www.fenderforum.com It's worth checking out. |
|
|
![]() ![]() |
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
