440 Forums > English > Mac Music > Audio, MIDI, DSP Cards and Interfaces, Controllers > Other Controllers, Interfaces, DSP Cards  |
 Midi Bulk Dump 01v |
 mar. 13 janv. 2004, 12:47
Message
#1
|
|
 Newbie Groupe : Members Messages : 5 Inscrit : 11 janv. 04 Lieu : Den Haag - NL Membre no 32,944  |
I'm doing a live show with a Yamaha 01V.
While there'e going to be a big change in the show and we'll be switching between the new and old situation I had the idea to completely dump the old situation and restore it lateron from the dump. My question is how to do it? I'm using a powerbook (osx.3) and a digi002Rack. Do I need some additional software or is it possible in protools? Thnx for helping me out. |
 |
 
|
|
mar. 13 janv. 2004, 17:02
Message
#2
|
|
|
Member  Groupe : Members Messages : 70 Inscrit : 01 juil. 03 Lieu : Framingham - US Membre no 20,523 |
I do not know what a situation is but you should be able to dump all of the O1/V settings via MIDI into whatever DAW you are using. Try this:
1. Record enable a MIDI track and make sure that your DAW is set to record from the O1/V (MIDI Cables must be connected too). 2. On the O1/V go to MIDI Page 4 and move the cursor to transmit. 3. In the DAW press record. 4. On the O1/V press enter. The O1/V transmit the current scene to the DAW which then records it. To restore all settings simply play back the recorded sysex. Ce message a été modifié par Metro SE - mar. 13 janv. 2004, 17:03. |
|
|
|
|
mar. 13 janv. 2004, 19:29
Message
#3
|
|
|
Newbie Groupe : Members Messages : 5 Inscrit : 11 janv. 04 Lieu : Den Haag - NL Membre no 32,944 |
Thnx man,
I'll try and let you know how it went. |
|
|
|
|
4 utilisateur(s) sur ce sujet (4 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
