  |
 Jaguar Audio Issues Workaround, How to revert to 10.1.3 audio kext |
  sam. 28 déc. 2002, 18:50
Message
#1
|
|
 Newbie Groupe : Members Messages : 7 Inscrit : 19 mars 02 Lieu : London Membre no 3,903  |
After waiting for months for Apple/M-Audio to fix the audio degradation issues introduced by Jaguar (their only advice was to reinstall 10.1.3 !!!!) we finally have a kinda solution:
http://homepage.mac.com/anthonyvu/ You will be installing an older AppleOnboardAudio.kext file from Mac OS X 10.1.3 and i can report that not only did the workaround install ok, but it seems to have fixed my problems. In effect, i have followed M-Audio's advice of reinstalling 10.1.3 but without sacrificing Quartz Extreme and other Jag goodies. happy xmas, no thanx apple/m-audio -------------------- LoudMouth Records (:=0
|
 |
 
|
|
sam. 28 déc. 2002, 22:43
Message
#2
|
|
 Senior Member  Groupe : Members Messages : 296 Inscrit : 10 août 02 Lieu : Rimghobb - UA Membre no 6,734 |
Thanks much for this tip, BoomBoom. Hope it didn't wake anybody up over at Apple. You may have heard of them--they own Logic...
Shhhhhh... |
|
|
|
|
lun. 30 déc. 2002, 08:32
Message
#3
|
|
 Rookie Groupe : Members Messages : 34 Inscrit : 24 sept. 02 Lieu : Lander - US Membre no 7,879 |
Is this my problem? I just bought an M-Audio Duo and can't get it to work properly. I'm using a driver that M-Audio claims works with their August prerelease of 10.2. My audio/midi setup won't let me access the input levels. or select anything but 16bit. and yes I have to crank up the gain on my preamps to get anything. Please advise.
Thanks, -W |
|
|
|
 mar. 31 déc. 2002, 19:51
Message
#4
|
|
 Maniac Member Groupe : Members Messages : 899 Inscrit : 12 oct. 01 Lieu : Kirkland Membre no 2,002 |
It's a problem IF you are using CubaseSX, no problems in Logic.
I read the post on Cubase.net that discovered the glitch. I have a Delta 410, and it behaves with Logic and my video apps. I refuse to be a beta tester for Steinberg, I wont upgrade until the promised 5.2 is released. Went through much pain with Cubase5, until it was right. 
-------------------- G-Dub
|
|
|
|
|
mer. 1 janv. 2003, 00:11
Message
#5
|
|
|
Rookie Groupe : Members Messages : 34 Inscrit : 24 sept. 02 Lieu : Lander - US Membre no 7,879 |
I'm not using either Cubase or Logic, I'm waiting for my Live 2.0 to arrive. But that is beside the point.
The problem seems to be somewhere between Audio/Midi Setup and the M-Audio Driver. It will recognize the intreface but won't let me adjust any preferences. i.e. I have to crank up my preamps because i can't adjust the input levels in Audio/Midi Setup. -W |
|
|
|
 mer. 1 janv. 2003, 01:15
Message
#6
|
|
|
Maniac Member Groupe : Members Messages : 899 Inscrit : 12 oct. 01 Lieu : Kirkland Membre no 2,002 |
I'm not sure about the Duo, but when I installed the OSX Delta driver
In the Delta control panel the I/O was turned off. Can you access the M-Audio control panel? Don't know much about USB audio. -------------------- G-Dub
|
|
|
|
|
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
