Why Can't I Hear My Dx7 On My Sequencers?, DX7: MIDI and Audio SETUP for Sequencers |
jeu. 7 nov. 2002, 18:01
Message
#1
|
|
Groupe : Messages : 0 Inscrit : -- Membre no 0 |
Hello,
I've got the following equipments: - an imac with Pro Tools Free and Logic AUdio running under OS 9.2.2, -a Yamaha DX7, - a Midisport UNO 1*1 Midi Interface - OMS 2.3.8 The Midi IN/OUT are OK but the issue is that I can't hear the DX7 on the Mac eventhought I connected its audio output to the audio input of the Mac? The audio output of the DX7 works perfectly when I connect it to my stereo so the problem must be related to the configuration of the sequencers (which is not so well explained in the manuals...). Thank in advance for your help! Bye, John |
|
|
Réponse(s)
(20 - 21)
dim. 24 nov. 2002, 01:12
Message
#21
|
|
Groupe : Messages : 0 Inscrit : -- Membre no 0 |
I would like to thank you all for your help and the time you spent on my issue!
This week, I've tried to follow your explanations as well as possible to record from my DX7, actually I've done it this way: Record the Midi piece on a Midi track Edit the Midi track on the sequencer (e.g. change pitch) while listening to the result on the DX7 or my stereo. Create an Audio track to record the edited Midi piece "played" by the DX7 Edit the Audio track (e.g. add delay) ... Even if it would be better to get an audio interface, I think I can continue working with my adapter for a while ; ) Then let's see! Bye, John |
|
|
dim. 24 nov. 2002, 01:29
Message
#22
|
|
Senior Member Groupe : Members Messages : 296 Inscrit : 10 août 02 Lieu : Rimghobb - UA Membre no 6,734 |
Another success story from the MacMusic forums!
Glad you got there, hamard. It's getting there that counts, not the route you take. |
|
|
4 utilisateur(s) sur ce sujet (4 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :