  |
 Recording Guitar Live, I hear the guitar fine, but can't record |
 jeu. 2 mars 2006, 04:48
Message
#1
|
|
 Newbie Groupe : Members Messages : 2 Inscrit : 01 mars 06 Lieu : San Francisco - KH Membre no 77,547  |
I'm having a problem. I just recently figured out the audio problem, I was finally able to mess around with what Logic has to offer and I even figured out how to get my guitar to sound. Now the problem I am having is I'm not sure how to record my guitar onto a track live. I tried pressing record and playing the guitar, I hear it fine, but nothing comes up. What do I have to do to be able to record live?
By the way I am using a G5 with the Motu 896hd. The problem is recording it live not the audio itself, I hear all the software instruments fine and the guitar. Thanks in advance for your response |
 |
 
|
|
jeu. 2 mars 2006, 13:54
Message
#2
|
|
|
Rookie  Groupe : Members Messages : 44 Inscrit : 14 sept. 05 Lieu : Hamburg - DE Membre no 69,997 |
Did you check: The Input? What Input is your Amp and Microphone using? I hope it is as simple as that... Common mistake... The Input is in the Arrange Window, above the Fader... Below the Sends... Above the Output. Hope this is the problem. Also check cables and is the source "plugged-in"? Good luck, keep creating those Guitar licks... I wanna hear em'!
|
|
|
|
|
jeu. 2 mars 2006, 18:33
Message
#3
|
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 01 mars 06 Lieu : San Francisco - KH Membre no 77,547 |
Yes, like I said...I can hear everything fine. I can hear the guitar fine, and mic. The inputs are connected to the right spots, I did assign the track to the right input (I'm guessing since I can hear the guitar when i do, correct?)
I just have no idea how to begin to record live once I press record and play the guitar. |
|
|
|
|
jeu. 2 mars 2006, 21:08
Message
#4
|
|
|
Newbie Groupe : Members Messages : 15 Inscrit : 24 oct. 05 Lieu : Silverdale - US Membre no 71,620 |
dreamstatedj,
What settings did you use to be able to play and hear your guitar and mic. I have an m-audio firewire solo w/ a guitar and mic hooked in to it. My OS X preferences are set to the m-audio firewire solo as my input. I cannot figure out the settings for logic. I am using desktop speakers as my monitors and a usb keyboard for my synths (which I got that to work). I have bought the videos from macproaudio.com, but they do not tell me what settings to use for a guitar and mic. Any advice would help. |
|
|
|
|
sam. 4 mars 2006, 00:41
Message
#5
|
|
 Maniac Member Groupe : Members Messages : 899 Inscrit : 12 oct. 01 Lieu : Kirkland Membre no 2,002 |
Did you assign the proper output? most important for hearing any track.
Also did record enable the track? 
Ce message a été modifié par gdoubleyou - sam. 4 mars 2006, 00:42. -------------------- G-Dub
|
|
|
|
|
sam. 4 mars 2006, 06:53
Message
#6
|
|
|
Rookie Groupe : Members Messages : 44 Inscrit : 14 sept. 05 Lieu : Hamburg - DE Membre no 69,997 |
You're right! Damn... Missed that one completely... Bravo... That has got to be it?! Hope so for the Guitarist in question. Good luck, I know how frustrating it can be... Hang in there... it will get sorted...
|
|
|
|
|
3 utilisateur(s) sur ce sujet (3 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
