  |
 Pro Tools Le 6.9 Real-time Automation, is not happening |
 lun. 6 févr. 2006, 04:14
Message
#1
|
|
 Newbie Groupe : Members Messages : 12 Inscrit : 25 oct. 05 Lieu : Kaliningrad - RU Membre no 71,671  |
Hello everyone! Got a problem.
I'm trying to automate audiotrack parameters in real time with MicroKorg midi-knobs. Everything goes according to the manual: general automation is activated in automation window, track automation is set to "write", playback is started, automation starts writing. But as I turn the knobs, nothing happens, although the manual suggests that Pro Tools will pick up control movements automatically! In other instances the MicroKorg works fine as a midi-controller, so it seems not guilty. Could anyone please suggest, what the problem might be? |
 |
 
|
|
lun. 6 févr. 2006, 19:34
Message
#2
|
|
|
Junior Member  Groupe : Members Messages : 115 Inscrit : 06 nov. 03 Lieu : Los Angeles - US Membre no 28,332 |
Does the microKorg control the panning and volume before you try to record automation? I don't know much about the microKorg but there is a little bit of setup involved in Pro Tools to get MIDI to control audio tracks.
|
|
|
|
|
lun. 6 févr. 2006, 21:03
Message
#3
|
|
|
Newbie Groupe : Members Messages : 12 Inscrit : 25 oct. 05 Lieu : Kaliningrad - RU Membre no 71,671 |
QUOTE (banevt @ Feb 6 2006, 18:34) Does the microKorg control the panning and volume before you try to record automation? I don't know much about the microKorg but there is a little bit of setup involved in Pro Tools to get MIDI to control audio tracks. No, it does not. I now tried to find something about setting up MIDI for audio control in the manual, but couldn't. Maybe you could suggest the chapter? |
|
|
|
|
mar. 7 févr. 2006, 03:21
Message
#4
|
|
|
Newbie Groupe : Members Messages : 12 Inscrit : 25 oct. 05 Lieu : Kaliningrad - RU Membre no 71,671 |
I suppose some additional info might help.
Having re-read the section in the manual on automation, I found no information about any additional setup being needed, so maybe it is mentioned elsewhere. As for microKorg, it works fine as a MIDI controller with every other application that I had a chance to try it with - Logic and Cubase tracks read automation commands from it, and no setup tricks are necessary. |
|
|
|
|
mar. 7 févr. 2006, 05:10
Message
#5
|
|
|
Junior Member Groupe : Members Messages : 115 Inscrit : 06 nov. 03 Lieu : Los Angeles - US Membre no 28,332 |
It won't be in the automation part of the manual. Check out machine control or midi machine control. It's definitely not a problem with your automation the microKorg must first be enabled so it moves the faders and pans then you can automate.
Ce message a été modifié par banevt - mar. 7 févr. 2006, 05:11. |
|
|
|
|
mar. 7 févr. 2006, 16:19
Message
#6
|
|
|
Newbie Groupe : Members Messages : 12 Inscrit : 25 oct. 05 Lieu : Kaliningrad - RU Membre no 71,671 |
Yep, I already got to that, thanks! No solution, though.
It seems that mK cannot be enabled in the "peripherals" dialogue as a machine control device - it just doesn't appear on the list. In fact, there's only three devices on that list - Digi's Command 8, HUI and some Mackie (if I recall well). Does that mean that nothing else can be used? |
|
|
|
|
mar. 7 févr. 2006, 18:59
Message
#7
|
|
|
Newbie Groupe : Members Messages : 12 Inscrit : 25 oct. 05 Lieu : Kaliningrad - RU Membre no 71,671 |
Ok, I think I have the answer - and it is generally negative.
Found it on DUC after quite some searching. Here's the link: http://duc.digidesign.com/showflat.php?Cat...&fpart=1#942643 Thank you for your time! ) Ce message a été modifié par Vadim Chaly - mar. 7 févr. 2006, 19:01. |
|
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
