  |
 Imac G5 And Delta 1010, is this possible? |
 sam. 19 févr. 2005, 21:08
Message
#1
|
|
 Newbie Groupe : Members Messages : 5 Inscrit : 12 févr. 05 Lieu : Draper - US Membre no 60,367  |
Hey everyone,
I am in the market to get a new mac for my recording setup, and am currently using a delta 1010 interface. My question is whether or not I can use that particular interface with the new imac g5? I dont know much about macs (pc user) but at first glance it doesn't appear to me that you can apply any add-ons to the system. If there is anyone that has the answer to this question, some info would be greatly appreciated. |
 |
 
|
|
lun. 21 févr. 2005, 18:49
Message
#2
|
|
 Maniac Member  Groupe : Members Messages : 899 Inscrit : 12 oct. 01 Lieu : Kirkland Membre no 2,002 |
the iMac G5 doesn't have any pci slots, you will need a firewire or USB interface.
-------------------- G-Dub
|
|
|
|
|
mar. 22 févr. 2005, 01:55
Message
#3
|
|
|
Newbie Groupe : Members Messages : 5 Inscrit : 12 févr. 05 Lieu : Draper - US Membre no 60,367 |
So to be able to use my delta 1010 would I have to get a power mac g5 tower? Let me know if that would even work... I dont want to go back to a PC, nor do I want to buy a new interface at the moment.
|
|
|
|
|
mar. 22 févr. 2005, 02:26
Message
#4
|
|
 Moderator  Groupe : Team Messages : 508 Inscrit : 09 juil. 02 Lieu : Sydney - AU Membre no 5,658 |
The G5 tower will work with the delta 1010, however depending on how old your PCI card for the 1010 is, you may have to get it modified by M-Audio.
The original versions of M-Audio Delta cards operated on 5 volts as supplied by the original PCI bus standard. The newly revised cards are PCI 2.2 compliant (3.3 volts) allowing compatibility with 64-bit PCI-X standards on all Power Mac G5s. If you purchased your Delta card on or after August 1, 2003, there is no charge to upgrade your card. For users who purchased their Delta cards prior to August 1, upgrade fees and shipping charges apply. |
|
|
|
|
dim. 27 févr. 2005, 23:59
Message
#5
|
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 27 févr. 05 Lieu : Nashville - US Membre no 61,466 |
I own a dual 1.8 g5 now but had a pc with a delta 66 before. I called repeatedly to m-audio about the pci issue. The response I finally got was that M-Audio was not prepared to convert any cards to PCI 2.2 compliant cards. Why? In the midst of development for the g5 a few years back apple changed the architecture between the 1.6 ghz g5 and the 1.8 ghz and above models. They are currently working on a workaround but are months from accomplishing their goal. They want to blame apple for changing their architecture in the middle of m-audio's devlopment but not publicly. The enginneer i spoke with said the only PCI card that is compliant is the revolution card. So your options are to buy on older 1.6 ghz g5 or find another PCI g5 compatible card.
It is very misleading for m-audio to advertise that you can upgrade when an upgrade is not even ready. for a project studio this is a major annoyance. M-Audio should have been making PCI 2.2. compliant cards years ago. I'm moving to the Echo Layla 3G PCI with breakout box. good luck. Ce message a été modifié par bloodniece - lun. 28 févr. 2005, 00:00. |
|
|
|
|
lun. 28 févr. 2005, 07:41
Message
#6
|
|
 Senior Member Groupe : Members Messages : 265 Inscrit : 05 déc. 03 Lieu : Memphis - US Membre no 30,424 |
i am using a delta 44 with a powermac G5. works fine.
|
|
|
|
|
lun. 28 févr. 2005, 19:39
Message
#7
|
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 27 févr. 05 Lieu : Nashville - US Membre no 61,466 |
does your pci card have one or two notches on the socket?
mine physically would not fit (one notch card, two notch sockets) one notch = pci 5V old standard two notches= pci 3.3V v.2.2 standard |
|
|
|
|
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
