MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
Bienvenue invité
 
Reply to this topicStart new topic
> Radium-49 Into Imac G5 Usb
mattlore
posté lun. 29 nov. 2004, 18:43
Message #1


Newbie


Groupe : Members
Messages : 4
Inscrit : 26 juil. 03
Lieu : New York - US
Membre no 21,980




OK. This is probably the easiest thing ever to figure out, but I can't do it. I just got an iMac G5 and can successfully record audio tracks with my MBox and ProTools. No problem there. The computer is a dream.

Now, I have a Radium-49 MIDI keyboard that I'd like to use with Garageband and ProTools. Of course, I cannot get it to work. I have the Radium going into my iMac via one of the USB ports, and I have the most current drivers for Panther. I've tried creating an icon for it in the MIDI/Audio Setup preference, but it's not possible to connect the ports to anything. According to Garageband, 1 MIDI device is being detected, but it seems like I've tried everything to get it to work as an input, and it just doesn't work.

I'd appreciate any advice/help. I'm sure there is an extremely easy solution for this. Thanks.
Go to the top of the page
 
+Quote Post
chmara
posté mar. 30 nov. 2004, 08:09
Message #2


Newbie


Groupe : Members
Messages : 18
Inscrit : 21 sept. 04
Lieu : Tucson - US
Membre no 51,447




I had this problem at first with my Radium 49 -- and had to download new drivers from M Audio. There are also a couple of quirky things I have not yet tracked down that knock the 49 out occassionally and a must reinstall the driver. Less since 10.3.6 however. Also try with the keyboard's USB power on -- even if you are using the computer port exclusively.

I wish I had opted for the larger keyboard as some NI stuff does not fit properly without switching octaves....and cannot fit an 88 in limited space.

BTW- with power on I have been able to use some of the extra midi controllers inside some of the sample and synth programs.
Go to the top of the page
 
+Quote Post
mattlore
posté mar. 30 nov. 2004, 15:24
Message #3


Newbie


Groupe : Members
Messages : 4
Inscrit : 26 juil. 03
Lieu : New York - US
Membre no 21,980




Thanks for responding. The M-Audio people contacted me, too, and gave me a simple solution that doesn't work. I'm beginning to think it's the keyboard - I've only ever gotten it to work once with my iBook, and it seems like it should be much easier than this.

Anyway, I did everything you suggested even before you responded, and I get nothing. M-Audio told me to create an entirely new setup in the Audio/Midi Setup, and when I do that, Garageband doesn't even recognize a MIDI input, whereas it does in the Default setting. So that seemed to be a step backward. The next step may be to try with the old Monster MIDI cables, god forbid.
Go to the top of the page
 
+Quote Post
chmara
posté mer. 1 déc. 2004, 19:04
Message #4


Newbie


Groupe : Members
Messages : 18
Inscrit : 21 sept. 04
Lieu : Tucson - US
Membre no 51,447




I assume you also changed cables and ports -- and would agree it is the unit itself. If still warranteed -- get it replaced, or maybe M-Audio will repair it. But first, find a freind with a similar set-up and try out the ax on it. I have found music software interations seem to create some algorythm situations not even paranoid and schizzo computers cannot understand.

GC
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Version bas débit - dimanche 15 déc. 2024, 01:04
- © MacMusic 1997-2008