440 Forums > Affichage d'un profilDominic Betmead
|
Profil
Photo personnelle
Avatar
Note
Options
Pro Infos
Musiciens / Réalisateurs Infos personnelles
Sexe non défini
Né(e) le 17 Oct. 1973
(51 ans)
N6 4QP Highgate, London
Royaume-uni
Dominic Betmead n'a pas de présentation personnelle pour le moment.
Statistiques
Inscrit : 08 juin 04
Vus : 1,453*
Dernière visite : jeudi 24 févr. 2005, 14:41
Heure locale : lun. 6 janv. 2025, 12:54
3 message(s) (0 par jour)
Contact
 Aucune information
 Aucune information
 Aucune information
 Aucune information
* Le compteur est mis à jour chaque heure
|
Sujets
Messages
Blog
Commentaires
Amis
Mon contenu
8 Feb 2005
I've always wondered about this.
My Microphone (Audio Technica 4033) has a 0db/-10 db switch on the back. My ART Tube Pre-amp (which I put before the MOTU and after the Mic) has a +20db switch on the input. My MOTU 828mkII Audio Interface has trim pots for the two mic/guitar inputs which have their own preamps, and the other 8 inputs on the back don't have trim pots, because they don't have preamps. All of the motu's inputs can be +4/-10 switched. Exactly how should I set this up levels wise? d
8 Jun 2004
I need to translate my Emu samples (I have built up a collection of thousands over 6 years) into a format readable by Logic 6 Pro. The samples are on SCSI drives connected to the Emu. My new Powerbook doesn't have SCSI of course but I have an old mac that does. Any ideas about how I might do this?? I'm hoping there's some software that can translate my sounds into AIFF's. thanks, all help appreciated...
dom |
Derniers visiteurs
Dominic Betmead n'a aucun visiteur à afficher..
Commentaires
Les autres utilisateurs n'ont laissé aucun commentaire pour Dominic Betmead.
Amis
Il n'y a aucun ami à afficher.
|
