  |
 Mac Using Logic As Sequencer |
 jeu. 23 févr. 2012, 06:03
Message
#1
|
|
|
Newbie Groupe : Members Messages : 6 Inscrit : 21 févr. 12 Lieu : Bristol - UK Membre no 119,938  |
Can anybody out there give me the steps to be able to use my Mac+Logic to be able to `MTC` (midi time code) an external 24 track Tascam 2488Neo digital recorder.
|
 |
 
|
|
ven. 24 févr. 2012, 14:08
Message
#2
|
|
 Newbie Groupe : Members Messages : 3 Inscrit : 24 avril 11 Lieu : Akron - US Membre no 117,560 |
QUOTE (snudge @ Thu 23 Feb 2012, 00:03)  Can anybody out there give me the steps to be able to use my Mac+Logic to be able to `MTC` (midi time code) an external 24 track Tascam 2488Neo digital recorder. Mine is a bit different of a setup than yours. I am running MOTU Digital Performer through a 828 MKII for A/D-D/A conversions. I use the MOTU Time Piece to route MTC to different devices and it works great. It also has a 9-pin output for controlling SONY decks. And it has TC outputs to go directly to outside devises. for slaving machines or A-Dats. Here's something I found on another forum; Syncing a 2488 to logic-8 Might help you some??? |
|
|
|
|
ven. 24 févr. 2012, 16:15
Message
#3
|
|
 Senior Member  Groupe : Members Messages : 246 Inscrit : 06 févr. 07 Lieu : Berkeley - US Membre no 88,124 |
assuming the tascam digital deck outputs MTC on a standard midi cable, this shouldn't be difficult.
set the deck up as a midi device to your midi interface, and verify it's transmitting MTC. in Logic, there will be a 'slave to sync' command or mode, with several choices. choose midi time code. put Logic in play, and it will be in standby. roll the deck, it'll run. it's been a while, but we used to sync our MOTU Performer files (midi only) to SMPTE audio stripes all the time. |
|
|
|
|
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
