|
|
A Bit Of Preamp + S/pdif Setup Help Needed |
|
|
|
mer. 5 sept. 2007, 09:08
|
Newbie
Groupe : Members
Messages : 1
Inscrit : 20 déc. 05
Lieu : Kingswood - AU
Membre no 74,158
|
Hey all My brother and I have just picked up a Joemeek TwinQ pre on loan, and we're trying to get it working with our set up. We run..... -iMac -M-Audio Firewire Audiophile -Behringer XENYX-1202 mixer -MXL 990 Condensor Mix -Logic Express We used to record vox by running the mic straight into the mixer, but the preamps on the Behringer were...well, average. Now we're test driving the Joemeek, we're trying to avoid the cheapy mixer alltogether and use the Digital out on the preamp. I have been able to get the Firewire Audiofile to register the S/PDIF in (input registering on the M Audio mixer software)...but, can't actually get any sound out of it. Eg - when I activate a track to REC on Logic....there's absolutely no input signal detected. I have tried to read the manuals etc and stuff, but I really need some help with getting it working with the Digital out please I'm pretty novice at the technical/set up side of things so i've tried to explain it as best as I can....but if you need to know more, just ask for the specifics and I'll see if I can explain it for you Thanks in advance! Ilya
Ce message a été modifié par Ilya_Harpas - mer. 5 sept. 2007, 09:10.
|
|
|
|
|
mer. 5 sept. 2007, 17:03
|
Newbie
Groupe : Members
Messages : 4
Inscrit : 05 sept. 07
Membre no 94,587
|
First I would try seeing if the digital in is recognized in Logics I/O section, it might be set to analog and you would need to switch it to digital to get a signal in Logic.
--------------------
|
|
|
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
|
|
|