MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
Bienvenue invité
 
Reply to this topicStart new topic
> Konnekt 8 And 4 Inputs, Can I use them simultaneously? Or 2 to 2..
ruczaj
posté jeu. 26 avril 2007, 21:55
Message #1


Newbie


Groupe : Members
Messages : 21
Inscrit : 24 févr. 04
Lieu : Poznan - PL
Membre no 36,766




Hello everybody,
Konnekt 8 has 4 inputs, 2 on front panel and 2 on rear one. I'm not sure if I can use them simultaneously?
I need 3 inputs at the same time: 1 synth, 1 drum machine, 1 microphone. Is it doable?
thanx for advices
Ruczaj
Go to the top of the page
 
+Quote Post
lepetitmartien
posté ven. 27 avril 2007, 04:18
Message #2


Moderator In Chief (MIC)
Icône de groupe

Groupe : Editors
Messages : 15,189
Inscrit : 23 déc. 01
Lieu : Paris - FR
Membre no 2,758




It seems you can but it means the synth and the drum machine will share each a side of the stereo rear input… uh! The front high Z ones are not suited for them

One solution is to connect the mic in front as obviously… And add a small mixer in the setup, to change easily between the synth and the drum machine to feed the rear audio in. But then you can record them separately or together but on the same tracks. Or you can stack another konnekt 8 but you'll have 3 mic input you don't need…

I'd be you I'd search another interface with more analogue inputs at line level, it'll be easier.


--------------------
Our Classifeds • Nos petites annoncesTerms Of Service / Conditions d'UtilisationForum Rules / Règles des ForumsMacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki?
BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki?
Go to the top of the page
 
+Quote Post
ruczaj
posté ven. 27 avril 2007, 08:32
Message #3


Newbie


Groupe : Members
Messages : 21
Inscrit : 24 févr. 04
Lieu : Poznan - PL
Membre no 36,766




QUOTE (lepetitmartien @ Fri 27 Apr 2007, 03:18) *
It seems you can but it means the synth and the drum machine will share each a side of the stereo rear input… uh! The front high Z ones are not suited for them

One solution is to connect the mic in front as obviously… And add a small mixer in the setup, to change easily between the synth and the drum machine to feed the rear audio in. But then you can record them separately or together but on the same tracks. Or you can stack another konnekt 8 but you'll have 3 mic input you don't need…

I'd be you I'd search another interface with more analogue inputs at line level, it'll be easier.



Thanks a lot, Lepetitmartien! Synths and drum machine are most important in my setup, so I'll try it in music store.
cheers
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Version bas débit - samedi 27 avril 2024, 16:11
- © MacMusic 1997-2008