  |
 Triton Studio/dp4 Problems |
 jeu. 3 août 2006, 16:21
Message
#1
|
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 03 août 06 Membre no 82,025  |
Ok, here's the setup, its very simple, but something just isn't working.
I have a Triton Studio connected to an 828 Mark II. Midi in to midi out and vice versa. My audio cables run from the Triton's Indiv. outputs 1 and 2 to the 828's inputs 1 and 2 (on the back). THE PROBLEM 1. I don't think I have an external problem, but if any one can see a flaw in the setup I would be grateful to be informed. 2. In digital performer, I have a Triton aux and a Reason aux. A few weeks ago they were working just fine, but since I recently moved, the Triton sounds are not working at all. I can see audio information coming from the Piano and other instruments from the Triton, but there is nothing coming from the Triton aux itself, and hence there are no Triton sounds. Reason, by the way, is working just fine. 3. Whenever I play the file back, the Triton won't switch to the sounds I have selected in digital performer. It doesn't seem to be connected correctly, and I don't know whether it is an external or an internal problem. Can anyone kindly help me to unravel this mystery? Thanks! Aaron |
 |
 
|
|
lun. 30 oct. 2006, 02:01
Message
#2
|
|
 Advanced Member  Groupe : Members Messages : 300 Inscrit : 21 août 02 Membre no 7,031 |
QUOTE (hachuie @ Thu 3 Aug 2006, 08:21)  Whenever I play the file back, the Triton won't switch to the sounds I have selected in digital performer. It doesn't seem to be connected correctly, and I don't know whether it is an external or an internal problem. Just insert a program change number in the track that send to Triton. |
|
|
|
|
sam. 18 nov. 2006, 06:46
Message
#3
|
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 03 août 06 Membre no 82,025 |
QUOTE (azusa @ Sun 29 Oct 2006, 20:01) QUOTE (hachuie @ Thu 3 Aug 2006, 08:21) Whenever I play the file back, the Triton won't switch to the sounds I have selected in digital performer. It doesn't seem to be connected correctly, and I don't know whether it is an external or an internal problem. Just insert a program change number in the track that send to Triton. Thanks for your help. However, I'm not sure how to do this. Could you walk me through it? Thanks again! 
|
|
|
|
|
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
