  |
 Installing Rme Rpm (hammerfall Dsp Series) On Imac G5, rme |
 ven. 13 oct. 2006, 14:21
Message
#1
|
|
|
Newbie Groupe : Members Messages : 2 Inscrit : 13 oct. 06 Membre no 84,166  |
hey people,
have installed drivers downloaded from rme website on to my my imac g5 but wen i plug the soundcard in, it doesn't recognise it (i.e. red led light indicatind error) woz wondering if anyone knew how to sort this. thanks alot mike |
 |
 
|
 dim. 15 oct. 2006, 05:13
Message
#2
|
|
 Moderator In Chief (MIC)  Groupe : Editors Messages : 15,189 Inscrit : 23 déc. 01 Lieu : Paris - FR Membre no 2,758 |
Well…
Are the drivers compatible with your OS X version? (it should be written either in the read-me file with the drivers oron RME website). Next, have you restarted? Have you repaired permissions using Apple Drive Utility? Just in case you don't do it regularly or you don't leave your computer on at night, with OnyX or an equivalent utility clean the different system caches (not Safari ones), do a general update prebiding and rebuild the databases (all but the spotlight one). you'll have to restart after this. Next you can try PRAM and NVRAM resets. Don't be surprised by Open Firmware for the NVRAM, just write down the stuff you'll have to type, it'll work perfectly. Last, reset the SMU, it'll force the imac to look after all there is connected and reinitialize all ports. If all this doesn't work, then we HAVE a problem 
-------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
|
|
sam. 21 oct. 2006, 02:00
Message
#3
|
|
 Newbie Groupe : Members Messages : 8 Inscrit : 05 févr. 06 Lieu : Lancaster - US Membre no 76,377 |
QUOTE (mace_mike @ Fri 13 Oct 2006, 13:21)  hey people, have installed drivers downloaded from rme website on to my my imac g5 but wen i plug the soundcard in, it doesn't recognise it (i.e. red led light indicatind error) woz wondering if anyone knew how to sort this. thanks alot mike Hi Mike, I've never owned an iMac, but I thought you couldn't put any PCI cards into it. Correct me if I'm wrong though. The RME RPM requires an RME PCI card for its interface to the computer. Are you plugging this directly into the FW port? If so, it will never work. |
|
|
|
|
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
