  |
 Mackie Midi Control On Dp 4.52 |
  jeu. 16 juin 2005, 13:00
Message
#1
|
|
 Newbie Groupe : Members Messages : 16 Inscrit : 26 sept. 03 Lieu : Geneva - CH Membre no 25,492  |
Just bought a Mackie Control second hand, which originally was a Logic Control, but the firmware to convert it to a Universal Control has been implemented by the original owner. I have no previous experience whatsoever with such control surfaces, so I plugged it yesterday midi in/out into my 4x4 M Audio midi interface, turned it on, having previously configured it from the Midi-Audio Setup menu in Digital Performer 4.52. Whenever I move the faders on the console, the led on the midi interface lights up, meaning it's being detected, but I was expecting the faders to automatically match the position of the virtual faders in the mixer screen of DP when I open a project or being able to start/stop playback using the relevant buttons on the Mackie, which is not at all the case now. I thought this Mackie Control issue would be a quite straightforward plug&play procedure, but it seems I was wrong...
Any suggestions of what I might be not doing right or still need to do to make it work? Thanx, A. |
 |
 
|
|
lun. 20 juin 2005, 14:49
Message
#2
|
|
 Moderator In Chief (MIC)  Groupe : Editors Messages : 15,189 Inscrit : 23 déc. 01 Lieu : Paris - FR Membre no 2,758 |
No one can help?
-------------------- Our Classifeds • Nos petites annonces • Terms Of Service / Conditions d'Utilisation • Forum Rules / Règles des Forums • MacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki? BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki? |
|
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
