Having Problems Recording Vocals And Midi On Logic, CAN'T HEAR VOCALS OR MIDI KEYBOARD SOUND Options

[CHARLES TAYLOR]

I AM USING LOGIC EXPRESS 7. I DECIDED TO STEP UP FROM GARAGE BAND. WHEN RECORDING VOCALS AND USING GARAGE BANDS SOFTWARE INSTRUMENTS WITH A MIDI KEYBOARD I HAD NO PROBLEM. I COULD HEAR EVERYTHING.
WHEN I USE LOGIC TO RECORD MY VOCALS I CAN SEE THE SOUNDWAVE BUT I DON'T HEAR ANY SOUND.

WHEN I USE LOGIC'S SOFTWARE INSSTRUMENTS I HEAR THE SOFTWARE GENERATED SOUNDS ONLY ON MY KEYBOARDS SPEAKERS. I DO NOT HEAR THE SOUND ON MY LAPTOP OR IN MY HEADPHONES.


EQUIPMENT: 15 INCH PB , YAMAHA MIDI KEYBOARD PSR-248

[gdoubleyou]

Do you have the proper inputs and outputs selected on the channel strip I/O section?

[johntennant]

Perhaps you haven't enabled "Software Monitoring" in the Audio Hardware Preferences box?

That could be it.

-J

[emgcarra]

Yeah, you must turn "sofware monitoring" on, but how could you avoid audio monitoring delay (latency)...? That´s a good question too.
In Protools you have a "latency control" that let you make record or play
adjustments, but with Logic (6.4 at least) I am still looking the way to do the job. Good luck.
emgcarra.-

Ce message a été modifié par emgcarra - lun. 23 mai 2005, 16:18.

[editbrain]

you don't have to turn on software monitoring if you have a mixer or a patch bay before the sound goes into logic. hmm what do you know. if done this way. no latency.

[johntennant]

Alot of newer interfaces have the option of direct monitoring as well. (MOTU and Firestation are two that come to mind.. there are many more.)

Me? I don't mind the latency, it's gotten so low. It's nice to run a delay or verb to get me in the mood.

-J

[coldharbour]

Yeah, you must turn "sofware monitoring" on, but how could you avoid audio monitoring delay (latency)...? That´s a good question too.
In Protools you have a "latency control" that let you make record or play
adjustments, but with Logic (6.4 at least) I am still looking the way to do the job.

You just create an Aux input in Logic and then select the ProTools hardware input # you want for the Aux input source. No need to use software monitoring, no latency.

WHEN I USE LOGIC'S SOFTWARE INSSTRUMENTS I HEAR THE SOFTWARE GENERATED SOUNDS ONLY ON MY KEYBOARDS SPEAKERS.  I DO NOT HEAR THE SOUND ON MY LAPTOP OR IN MY HEADPHONES.

EQUIPMENT: 15 INCH PB , YAMAHA MIDI KEYBOARD PSR-248

I don't think it's possible that you hear Logic's software instruments from your Yamaha PSR-248 keyboard's speakers..

PS : No need to SHOUT.

Ce message a été modifié par coldharbour - mar. 24 mai 2005, 21:08.