MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
 
Reply to this topicStart new topic
> Do I Need A Hardware Based Compressor ?
shaneblyth
posté dim. 5 sept. 2004, 03:25
Message #1


Member
**

Groupe : Members
Messages : 50
Inscrit : 16 juil. 04
Lieu : Queenstown - NZ
Membre no 47,017




I am setting up my home studio and wanted to know if i require a hardware based Compressor for the vocals as I record them or if there is a way to get round it and compress as I record with various DAW software.. like Logic, Ableton Live 4 or Tracktion?
I am trying to save a little money and this is not a commercial studio as I am sure you have guessed but I definitley want to compress on recording then do a little more in the mix stage on the Vocals
Go to the top of the page
 
+Quote Post
tunetwister
posté dim. 5 sept. 2004, 07:43
Message #2


Rookie
*

Groupe : Members
Messages : 36
Inscrit : 12 mars 04
Lieu : Portland - US
Membre no 38,330




I use A hardware based compressor so that I do not clip going to the ADC's. You can get away with out one by making sure you have your levels under 0db and they never clip.
Go to the top of the page
 
+Quote Post
FinnB
posté dim. 5 sept. 2004, 12:25
Message #3


Newbie


Groupe : Members
Messages : 13
Inscrit : 13 avril 04
Lieu : Reykjavik - IS
Membre no 40,907




Recording through a compressor is a "destructive" action, like EQing. There is no turning back. I'd record the vocals 24 bit and below clipping. Then you can compress afterwards by taste, DAW or outboard...
Go to the top of the page
 
+Quote Post
Dave Bourke
posté dim. 5 sept. 2004, 15:30
Message #4


Member
**

Groupe : Members
Messages : 79
Inscrit : 23 janv. 04
Lieu : Dublin - IE
Membre no 33,924




I faced this problem, too. I solved it by buying an Aphex 207 dual tube preamp. It has built-in mic limiting circuitry. It doesn't compress, obviously, but it ensures the artist won't clip on input. I love it. Worth its weight in gold. And very reasonably priced, too.

Good luck!


--------------------
Dave Bourke
- ideation -
Go to the top of the page
 
+Quote Post
tunetwister
posté lun. 6 sept. 2004, 08:43
Message #5


Rookie
*

Groupe : Members
Messages : 36
Inscrit : 12 mars 04
Lieu : Portland - US
Membre no 38,330




I try to record well bellow 0db to allow head room. I only use a compressor as a safty net, I set it up as a limmiter. I actualy only put limmiters on possible trouble tracks, most tracks just the from the board to the Audio interface, not limmited. Yes you can realy mess up a recording with commpression. I should have made this clear as many people here are new to recording.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Version bas débit - mercredi 18 déc. 2024, 20:14
- © 440 Forums 2011