lun. 2 juil. 2001, 09:24
Message
#1
|
|
Newbie Groupe : Members Messages : 3 Inscrit : 02 juil. 01 Lieu : Portland Membre no 1,143 |
I am very interested in purchasing a motu 828 for use with my new ibook 500, but am curious about performance issues.. Will there be limitations compared to a G4 powerbook (such as multitrack use) because of the limited bus speed (66mhz) on the ibook as well as the 4200 Rpm hard drive and 256k on board cache (instead of the powerbooks 1mb on board)..
I know I can compensate somewhat with lots of Ram...but Basically I want to know if its wise to use the motu 828 with an ibook? Thank you for your advice in this matter.. |
|
|
lun. 2 juil. 2001, 18:02
Message
#2
|
|
Rookie Groupe : Members Messages : 41 Inscrit : 20 mai 01 Lieu : Port Charlotte Membre no 658 |
I'm using the 828 with my iBook and it seems to be just fine. I suppose the limitations would depend on what you want to do with it. If you plan on doing 32+ channels of audio with lots of plug-ins and edits, the Ti Powerbook might serve you better. Don't forget you can always bounce multiple tracks with all the edits & plugs to stereo then keep adding tracks. Also, a firewire HD with a passthrough port will give you better disk performance (it's always better to record audio to a different drive than the one running your system). According to Roger Nichols & others on the pro recording forums, a fast firewire HD with the Oxford chipset pairs up very nicely with the 828.
Scott |
|
|
mar. 10 juil. 2001, 23:02
Message
#3
|
|
Newbie Groupe : Members Messages : 6 Inscrit : 10 juil. 01 Lieu : East Wenatchee - US Membre no 1,214 |
if you're plugging your motu 828 through the firewire....how do you plug in a fire wire HD?
|
|
|
mar. 10 juil. 2001, 23:36
Message
#4
|
|
Newbie Groupe : Members Messages : 3 Inscrit : 02 juil. 01 Lieu : Portland Membre no 1,143 |
Good ? Sym.. DIgibus answer PLZ.. By the way I bought a powerbook so no issues now , but I'd like to know how daisy chaining a hard drive off the motu will work..
bigwhig |
|
|
mer. 11 juil. 2001, 08:29
Message
#5
|
|
Rookie Groupe : Members Messages : 41 Inscrit : 20 mai 01 Lieu : Port Charlotte Membre no 658 |
RE: How do you plug the HD in? Easy, plug the HD into the iBook & the 828 into the HD (all the Firewire drives I've seen or used have 2 ports). OR get a Firewire hub & plug both into it.
>bigwhig : Doesn't the TiPowerbook have 2 firewire ports? At any rate, just make sure to get a fast (7200RPM) Firewire drive with an extra (pass through) port & make sure it uses the Oxford chipset. Scott |
|
|
lun. 25 mars 2002, 22:26
Message
#6
|
|
Newbie Groupe : Members Messages : 6 Inscrit : 03 août 01 Lieu : Van Nuys Membre no 1,399 |
I am using an ibook for recording, but I'm always on the road. I can't use the motu 828 'cause it's too big. Is there anything smaller that uses firewire? Also, are there any pocket hard drives which have a higher speed than 5400rpm? What is the best out there? I also read that the transfer speed is not dependent on the speed of the drive but on the firewire bridge speed which won't be as fast as the ibook's internal hard drive speed. Please clarify this for me. Thanks.
|
|
|
mar. 26 mars 2002, 15:27
Message
#7
|
|
Newbie Groupe : Members Messages : 15 Inscrit : 16 mars 02 Lieu : Brighton Membre no 3,863 |
I have an 828 and G4 laptop and I too am anoyed at the size of the soundcard, it makes a rediculous bundle. Check out the 'USBpre' (search) 2 channel card, its for the film industry, so its only 2 channel, but its XLR, phantom and has MS too and it's bus powered. Its looks ideal for porta-recording. But its about £500..
Also emagic do a 4 channel (I think) bus powered sound card, which is cheaper(but no XLR's). As for HD speeds, as far as I know, the Firewire bridge becomes an issue with HD's that are not true Firewire, but they use an inbuilt converter/bridge which is slow. So you need to look into the details of the HD in question. Hope thats of help. -------------------- melta
|
|
|
mar. 26 mars 2002, 21:54
Message
#8
|
|
Newbie Groupe : Members Messages : 6 Inscrit : 10 juil. 01 Lieu : East Wenatchee - US Membre no 1,214 |
Actually, I just saw in my Musician's Friend catalog, that DigiDesign and Foscrite (Sp?) have teamed up and put out a two channel USB devise that has NO latency problems! And I think it runs somewhere around $300 or $400. Looks pretty sweet to me. XLR and 1/4' inputs, monitor outs, headphone outs...etc. And it has Foscrite pre-amps!!! That makes it worth it's weight in gold. Anyways...I forget the name of it...so if anyone finds it on the web, let me know the link.
|
|
|
mar. 26 mars 2002, 23:31
Message
#9
|
|
Newbie Groupe : Members Messages : 6 Inscrit : 03 août 01 Lieu : Van Nuys Membre no 1,399 |
Is this what you're looking for?
Digidesign Mbox USB Audio Interface NEW!!!!! + = A complete recording studio starting at only $1,799!! Call BRAD LYONS at (800)222-4700 x1362 for further information. If there is one word that I could describe Digidesign's new Mbox... WOW would be an understatement! Priced less than their previous PCI interface (Audiomedia III), the Mbox is a state of the art USB interface that is ideal not only on a desktop Apple Macintosh (PC Windows coming soon!!), but is the perfect solution for a portable ProTools editing station! Shipping with Digidesign's ProTools LE software, the Mbox package ($499 retail) is perfect for the home studio enthusiast or even the professional who wants to take his ProTools mixes on the road.. When I first saw the Mbox, I have to admit it looked a lot like my cable modem. A cable modem it isn't (obviously!). The Mbox is extremely compact, but still hard to believe that Digidesign was able to fit so much! Here is what comes on the Mbox: Two analog inputs and outputs, featuring Focusrite mic preamps 24-bit stereo S/PDIF digital I/O Pristine 24-bit signal path from input to output Two analog TRS inserts Headphone output with dedicated volume control Zero-latency monitoring 100% USB powered Pro Tools 5.2 LE software (supporting DigiStudio) All information on this site is property of Brad Lyons. Absolutely no unauthorized use is permitted. This site uses frames and is best viewed when accessed through the mainpage URL: http://www.audioandmidi.com For further information, please contact Brad Lyons at the information below. |
|
|
mer. 27 mars 2002, 00:05
Message
#10
|
|
Newbie Groupe : Members Messages : 15 Inscrit : 16 mars 02 Lieu : Brighton Membre no 3,863 |
Had a look into this area, some lists of soundcards available :
http://www.pcrecording.com/soundtable.htm http://www.emt.net.au/audio_interfaces.htm And that digidesign card sounds interesting, but the info on it is so poncy, its hard to just suss out the basics of it, its $500 or £500. (UK prices suck.): http://www.digitalvillage.co.uk/aproduct.a...?ProductID=2743 -------------------- melta
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :