440 Forums > English > Mac Music > Audio, MIDI, DSP Cards and Interfaces, Controllers > Other Controllers, Interfaces, DSP Cards  |
 Getting Midi Notes To Play Sounds, Can't hear anything.. |
 mar. 23 mars 2004, 18:59
Message
#1
|
|
 Newbie Groupe : Members Messages : 10 Inscrit : 13 janv. 04 Lieu : Chicago - US Membre no 33,108  |
I am new at this so i don't really know if this is possible...I have an mpc2000xl hooked up to protools 6.2.3 le via midisport 2x2 ('out' of mpc to 'in' of midisport channel A). I do not have the 'out' of the midisport connected back to the 'in' of the mpc.
Anyway when i create a midi track and record in protools as my mpc is playing, all of the midi notes get recorded in pro tools as i have set each track to channel out to the midisport. But how do i hear the sounds? The mpc has .pgm files that contain sounds that the midi sequence triggers. Is it possible for these sounds to be transfered via midi, or in any way to be played back by the midi sequence in pro tools (received by the mpc)? please help me. ameen |
 |
 
|
 mer. 24 mars 2004, 04:25
Message
#2
|
|
 Junior Member  Groupe : Members Messages : 185 Inscrit : 18 avril 03 Lieu : Tampa - US Membre no 16,354 |
Try hooking the "out" of the MIDIsport to the in of your MPC, and set the MIDI channel of the sequencer track to the same channel that the MPC is set to recieve on. (Prob 1 or maybe 10, or any if it is in Omni mode, bust out the manual if necessary.) Now, when you play the MIDI track back in ProTools it will trigger the notes on your MPC
 You can edit, arrange or do whatever to the MIDI data, trigger the sounds on your MPC, and record the audio from the MPC back into ProTools. Now your audio is sync-recorded into your PT Session. I hope that wasn't confusing.Hope that helps TD -------------------- |
|
|
|
|
mer. 24 mars 2004, 07:05
Message
#3
|
|
|
Newbie Groupe : Members Messages : 10 Inscrit : 13 janv. 04 Lieu : Chicago - US Membre no 33,108 |
thanks! i can now play midi sequences in pro tools to trigger sounds on my mpc. however i still cannot figure out how record the audio from the MPC back into ProTools. will doing this eliminate the need for the mpc to be turned on for the sounds? will i need an audio track for this or can i still do it with midi? i would like to transfer everything into my pro tools session. thanks again.
ameen |
|
|
|
|
jeu. 25 mars 2004, 05:17
Message
#4
|
|
|
Junior Member Groupe : Members Messages : 185 Inscrit : 18 avril 03 Lieu : Tampa - US Membre no 16,354 |
You are going to need to plug the audio outputs of the MPC into the mBox or (whichever). Create a stereo audio track in ProTools, and record enable it. If you want to be able to hear the Instrument thru PT while you are playing the song but not recording, you will want to make a stereo aux input track also.
Now, when you press record and play in PT the audio from the instrument will be recorded to disc. At this point it will be in PT as an audio track. Don't forget to bust out the manual if you need to. TD -------------------- |
|
|
|
|
jeu. 25 mars 2004, 07:48
Message
#5
|
|
|
Newbie Groupe : Members Messages : 10 Inscrit : 13 janv. 04 Lieu : Chicago - US Membre no 33,108 |
excellent. thanks so much for your help. it is working great now.
ameen |
|
|
|
|
jeu. 25 mars 2004, 15:00
Message
#6
|
|
|
Junior Member Groupe : Members Messages : 185 Inscrit : 18 avril 03 Lieu : Tampa - US Membre no 16,354 |
Cheers, now go and make your track!
TD -------------------- |
|
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
