  |
 5.1 routing in Protools |
 jeu. 6 sept. 2001, 21:48
Message
#1
|
|
 Webmaster  Groupe : Admin Messages : 3,204 Inscrit : 29 oct. 00 Lieu : Sommieres - FR Membre no 11  |
Using a track assigned to a 5.1 output (with a 5.1 routing created in the I/O setup ) or assigned in another way, is there a tips to route a sound ONLY to the LFE out?
If an output is affected to a 5.1 path (in IO setup), it's impossible to route a sound only to it because 2 paths (one 5.1 and one mono) can NOT be routed to the same output, and the 5.1 pan window don't allow a sound to be routed only to the LFE out..... I can't imagine that there is no solution? -------------------- Soif, MacMusic Webmaster
440Software, our new audio software directory _____________________________________ 440Software, notre nouveau site sur les logiciels audio pour Mac, PC et iPhone/iPad |
 |
 
|
|
jeu. 6 sept. 2001, 22:13
Message
#2
|
|
 Moderator  Groupe : Moderators Messages : 3,768 Inscrit : 07 déc. 00 Lieu : PARIS - FR Membre no 23 |
of course it's possible to find solutions
 For exemple: a track routed to 5.1 buss channel: fader off with a buss assign to LFE pre-fade position. In that case: control is via level automation of the aux'send Other way, remember: LFE channel MUST be cut PHYSICALY maximum at 250 Hz (flat to 100, 120 Hz) -------------------- Plombier, DéZingueur de HP, ferblantier
 |
|
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
