Version imprimable du sujet

Cliquez ici pour voir ce sujet dans son format original

440 Forums _ M-Audio _ Problems With B-1 And Firewire Solo

Écrit par : Ambeintz dim. 1 mai 2005, 19:18

Hi all,

I've been having problems recently after buying a Behringer B-1 mic and the new M-Audio Firewire Solo.I'm getting playback from the left channel but not from the right,whether its the cable set up or something else im not sure,but has anyone else had this problem with either appliances?

Écrit par : lepetitmartien lun. 2 mai 2005, 04:20

As the mic is mono, maybe the default direct playback is thru the left channel…
I will look into the manual, there something I don't understand too wink.gif (now I should go to sleep…) cool.gif

Écrit par : lepetitmartien lun. 2 mai 2005, 15:48

from the manual page 3

QUOTE
Microphone Input    Mic-level input on balanced XLR connector. This connector is only active when the Front/Rear Input Selector (5) is set to “Front” (OUT  position). Input from this connector appears in your DAW software as a mono signal on the left side of the stereo input pair.

Page 13
QUOTE
The signal level you receive from these inputs will appear on the mixer page as Left (Mic) and Right (Guitar) inputs on the Analog 1/2 In meters.

I think it's a desperate case in direct monitoring.

You can mix inside you mac and listen to it after and so have a more comfortable signal but you'll have latency… sad.gif

Écrit par : Ambeintz lun. 2 mai 2005, 18:40

Hm thanks very much for the help,i'll play around a bit..i must confess i didn't quite understand what they meant in the manual,but i'll see if i can work something out smile.gif

thanks again,

Jake

Écrit par : lepetitmartien mar. 3 mai 2005, 05:03

They mean : you monitor directly with the voice in one ear and the guitar in the other one… final blink.gif

Propulsé par Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)