MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
 
Reply to this topicStart new topic
> Sysex Transfer Pc->korg M1, MIDI MATE cable
Seersholm
posté sam. 7 avril 2007, 22:58
Message #1


Newbie


Groupe : Members
Messages : 2
Inscrit : 04 avril 07
Lieu : Hvalsø - DK
Membre no 90,023




Hi guys

I've tried everything:

I just can't get the factory settings and sounds back into my Korg M1. This is what i've done so far:

I bought a socalled MIDI MATE cable which connects my laptop with the keyboard (USB-MIDI)
I downloaded the m1preld.syx file from the internet.
I d/l'ed several transfer programs.
Cable is connected with MIDI out to MIDI in - and visa versa.
I set the Global MIDI channel to 1 on the keyboard
I used the programs one by one to send the file, but the keyboard do not respond with the right sounds.
I am able to transfer *.m1p files, keyboard shows the sound names, but there's no sound out of the keyboard.

What happens:
Mostly nothing.
After some tries with the sysex transfer, the keyboard shows some sound names with absolutely no meaning, and theres no sound out of the keyboard whatsoever.

Anything that might help is GREATLY appreciated.

Thanks

Jacob Seersholm, Denmark
Go to the top of the page
 
+Quote Post
lepetitmartien
posté dim. 8 avril 2007, 01:52
Message #2


Moderator In Chief (MIC)
Icône de groupe

Groupe : Editors
Messages : 15,189
Inscrit : 23 déc. 01
Lieu : Paris - FR
Membre no 2,758




If you dont connect the M1 to some audio chain (headphones, audio interface…) of some sort you won't hear a thing. (Sorry if you know the difference over MIDI and audio but it's a common mistake and your question didn't lift the ambiguity)

Which software have you used for Sysex?


--------------------
Our Classifeds • Nos petites annoncesTerms Of Service / Conditions d'UtilisationForum Rules / Règles des ForumsMacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki?
BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki?
Go to the top of the page
 
+Quote Post
lepetitmartien
posté ven. 20 avril 2007, 04:25
Message #3


Moderator In Chief (MIC)
Icône de groupe

Groupe : Editors
Messages : 15,189
Inscrit : 23 déc. 01
Lieu : Paris - FR
Membre no 2,758




The only software I trust for sysex on a windows PC is MIDI-OX

Once the M1 is correctly connected (MIDI in into out both ways), the MIDI channel is set correctly where appropriate (sorry, I'm a mac user, and the last time I've done this on a PC is years ago… Someone else may help), you should be able with MIDI-OX to transfer the sysex file easily.

If you have the M1 manual, you should have the proper set up on the M1 side explained.

Note that if your MIDI interface sends a MIDI clock you can't stop, the sysex won't work (like the MIDI ports on creamware products)

Sorry not to be of more help than this, but there's too many things I don't know/remember to help you in full. I've only had to do this once, years ago on a PC and for a Machinedrum… unsure.gif


--------------------
Our Classifeds • Nos petites annoncesTerms Of Service / Conditions d'UtilisationForum Rules / Règles des ForumsMacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki?
BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki?
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Bienvenue invité
Contribute
Version bas débit - samedi 27 avril 2024, 19:25
- © PcMusic 1997-2007