MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
2 Pages V   1 2 >  
Reply to this topicStart new topic
> Which Audio Card ? Dual G4, Osx, Tascam Tm-d1000
makingmusic4him
posté ven. 19 sept. 2003, 23:42
Message #1


Newbie


Groupe : Members
Messages : 1
Inscrit : 06 juin 03
Lieu : Avondale - US
Membre no 19,226




I am moving from Windows to MAC (sounds of applause in the back ground).
Have a dual G4, OSX.

No audio cards yet, just 'out of the box' machine.

Have various midi instruments.
Have TASCAM TD-M1000 that can respond to remote midi commands.

Ultimate goal would be to have DP4 or Logic 6 (I currently have Reason 2.5) working with the Tascam mixer, so that midi, live sound and samples can all be mixed together with OS X based DAW.

Any idea on what would be a good PCi audio card for this ?
DP4 or Logic or what ??

Thanks for any ideas,
Bill
Go to the top of the page
 
+Quote Post
boze
posté mer. 24 sept. 2003, 17:34
Message #2


Junior Member
***

Groupe : Members
Messages : 132
Inscrit : 13 sept. 03
Lieu : - US
Membre no 24,676




well, definitely _don't get a mk1 motu 2408 for cheap on ebay. their drivers for osx are awful and cause so many kernel panics as to make the card unusable. motu makes quality hw, but their tech support is really poor and you roll the dice when you buy their products because if the time comes to call them all you'll ever get is a busy signal.

what are your needs for I/O? what's going into the tascam mixer?

the most importan thing will be to find a card that has i/o that matches your needs _and (most importantly) has solid drivers for osx. ask around and be patient.


--------------------
Kit: Dual Ghz G4, Vaio 2.6ghz GRV670 notebook. Software: Reaktor, Reason, Ableton Live. Leanings: Laptop performance, jazz guitar, singing.
Go to the top of the page
 
+Quote Post
Fusion Head
posté dim. 28 sept. 2003, 02:38
Message #3


Newbie


Groupe : Members
Messages : 7
Inscrit : 28 sept. 03
Lieu : Victoria - CA
Membre no 25,600




I just bought a G4 DP machine also, and am using Logic Gold 6. I started by using Emagic's EMI 6|2 interface (came with the package deal I bought) But it was VERY limited, and questionable audio quality.

After comparing options, I ended up just buying the new MOTU 828 MkII . This new version of this Firewire interface has up to 10 inputs and 10 outputs of audio simultaneous, including 2 microphone preamp'd inputs and 8 line level inputs, 10 line level outputs, headphone output, and MIDI in/out port, as well as some digital inputs/outputs (for connecting to DAT machine or a digital mixer, etc.) And they did not raise the price for the MkII version. Pretty darn cool!

I have tested almost everything and it works great, except the MIDI port was dropping/missing notes as Logic was playing a sequence to one of my sound modules. I found MOTU had a new driver on their website so I installed it (MAKE SURE YOU KEEP THE INTERFACE OFF WHEN YOU INSTALL THE NEW DRIVER... or you will disable the interface and have to clean all the driver/console/preference files off your hard drive and have to reinstall!) This fixed the MIDI problem fine.

I would highly recommend this new one from MOTU...dollar for dollar this is a great pack of features, and seems to work well with Logic so far....
Go to the top of the page
 
+Quote Post
boze
posté mer. 1 oct. 2003, 17:11
Message #4


Junior Member
***

Groupe : Members
Messages : 132
Inscrit : 13 sept. 03
Lieu : - US
Membre no 24,676




it's true that everybody loves the 828 and that the mk2 is a good value. unfortunately, it's made by MOTU- so prepare yourself for bad customer service. I'd consider maybe waiting until Panther comes out and seeing how well MOTU deals with any driver updates that might be needed.

They make good hw, but if getting your soundcard to work right isn't on the top of their list because they're working on newer stuff or whatever then you'll get some serious cold shoulder treatment.

I've been emailing their tech support ppl for a full year trying to get decent drivers for the MOTU 2408 mk1 and they just don't care. "Please check the website periodically" is the only response I've ever gotten. No updates since March and those were 1.01 and didn't help.

So the 828 already works well and folks love it, but I just have to mention that because nobody who'd been through what i'd been through could really recommend MOTU with a clear conscience. I'd like to sell my 2408 and get an 828, but I'd only buy a used one because I'm hard pressed to pay MOTU for dissing me and my $800 soundcard.


--------------------
Kit: Dual Ghz G4, Vaio 2.6ghz GRV670 notebook. Software: Reaktor, Reason, Ableton Live. Leanings: Laptop performance, jazz guitar, singing.
Go to the top of the page
 
+Quote Post
Fusion Head
posté jeu. 2 oct. 2003, 04:03
Message #5


Newbie


Groupe : Members
Messages : 7
Inscrit : 28 sept. 03
Lieu : Victoria - CA
Membre no 25,600




Man, that sucks. I guess I'll just keep my fingers crossed that MOTU gets their s**t together and starts supporting customers better. Maybe the "force" that is Apple-Emagic will also now help to influence third party vendors to keep drivers up to date. Emagic does not seem to purport to be an audio interface specialist, rather they focus more on their software and depend on other vendor's hardware to complete their system solution. So there is incentive for them to make sure a few good hardware vendors are effectively supporting the Mac/Logic system. That's my dream anyway!
Go to the top of the page
 
+Quote Post
m0no
posté jeu. 2 oct. 2003, 16:11
Message #6


Newbie


Groupe : Members
Messages : 10
Inscrit : 27 sept. 03
Lieu : The Hague - NL
Membre no 25,552




Hi, all,

i have been using the 828 for over 1,5 years now , professionally never had a problem. I use it with a powerbook and logic [ user since 2,6 ] The sound is good the latency is low Only one bad thing with a few models is the mic amp it makes noise, so check that before buying just connect speakers and crank the vol up if u hear a buzz, get an other one..... But if u don't do vocals it rocks.


Moque
Go to the top of the page
 
+Quote Post
binus
posté jeu. 9 oct. 2003, 19:03
Message #7


Maniac Member
******

Groupe : Members
Messages : 525
Inscrit : 03 mars 02
Lieu : FONDETTES - FR
Membre no 3,674




I am surprised that nobody ever mentioned something like AUDIOMEDIA III blink.gif wink.gif
By the way, does anyone knows if the G5 accepts this PCI card ??? unsure.gif
Go to the top of the page
 
+Quote Post
boze
posté jeu. 9 oct. 2003, 19:55
Message #8


Junior Member
***

Groupe : Members
Messages : 132
Inscrit : 13 sept. 03
Lieu : - US
Membre no 24,676




hi binus,
check for a thread on that specific issue-
there's a trade in program for $295+shipping that will give you a pci424 card that is compatible with the G5. it's avail to registered owners of any pci324 or older pci424 system.


--------------------
Kit: Dual Ghz G4, Vaio 2.6ghz GRV670 notebook. Software: Reaktor, Reason, Ableton Live. Leanings: Laptop performance, jazz guitar, singing.
Go to the top of the page
 
+Quote Post
binus
posté jeu. 9 oct. 2003, 22:27
Message #9


Maniac Member
******

Groupe : Members
Messages : 525
Inscrit : 03 mars 02
Lieu : FONDETTES - FR
Membre no 3,674




Thanks Boze,
But that does mean that my AudioMedia III is only good for trash... mmmmm ??? It could not be traded, could it ????

Regards

Binus
Go to the top of the page
 
+Quote Post
Fusion Head
posté dim. 12 oct. 2003, 18:36
Message #10


Newbie


Groupe : Members
Messages : 7
Inscrit : 28 sept. 03
Lieu : Victoria - CA
Membre no 25,600




One more point about the MOTU 828 MkII - in response to the comment by mOno regarding the mic preamps, the two provided with the MkII version seem to be okay in terms of low noise. However, I would say that in my opinion they are not as "warm" sounding as I would like. I have not read anything about them, and MOTU does hype what kind of preamp circuits it is using ... so I assume these are not "high end" preamps. They are handy to use if you really need them, but for microphone inputs I am using my mixer's preamps (and an outboard preamp) and feeding their outputs to the MOTU line inputs. I am using the two MOTU combo mic/line inputs only as line inputs, to give me a total of 10 simultaneous line inputs.

Ce message a été modifié par Fusion Head - dim. 12 oct. 2003, 18:37.
Go to the top of the page
 
+Quote Post

2 Pages V   1 2 >
Reply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Version bas débit - vendredi 29 mars 2024, 06:57
- © 440 Forums 2011