MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
Bienvenue invité
 
Reply to this topicStart new topic
> Question For All You Pro Tools Hd Users Out There
slowintrepid
posté dim. 17 avril 2005, 14:47
Message #1


Rookie
*

Groupe : Members
Messages : 43
Inscrit : 04 janv. 04
Lieu : Randolph - US
Membre no 32,376




k so I fully understand everything about PT LE and other DAW's but HD rigs really boggle my mind, mainly the whole DSP/Interface part. so here goes.

so I know to get started with a HD riig you need two things

1. the DSP Core and an Interface (96 I/O and 192 I/O)
and
2. a Ton of money.

but here are a few things I dont understand.

1. how does Digi guarantee support for up to like 192 and 96 channels of I/O (HD|3 Accel of course) and does it guarantee that in other programs that support TDM like Digital Performer, Nuendo and Logic? or is it just plug-in DSP in those programs?

2. on the interfaces there is the 96 I/O and the 192 I/O but on the 192 I/O I don't see any typical TRS inputs I just see tiny hole that says 1a 1b through 8a 8b
I can't see that well in the picture http://www.digidesign.com/products/hd/syst.../192enlarge.jpg does that mean there is a separate I/O box or somthing for that unit.

3. whats the deal with the "Sync I/O" box, no idea what that thing does.

4. on the "system diagram" they them using an external scsi drive, is that nessecary for the high track counts, or can you get by with just a fast firewire drive.

is there a difference between using HD gear with Pro Tools, than with Digital Performer, Logic and Nuendo or do you get the same performance and everything?

and finally.

are there any other companys that make DSP cards and I/O interfaces similar to an HD rig? (like RME or Metric Halo I don't know if they're similar)

thanks alot
SIntrepid
Go to the top of the page
 
+Quote Post
Gert-Jan
posté dim. 17 avril 2005, 21:19
Message #2


Newbie


Groupe : Members
Messages : 3
Inscrit : 27 févr. 04
Lieu : Benthuizen - NL
Membre no 37,011




The best way to answer all your questions is on the Digidesign website.
Go to support> downloads> Technical Document Library and find out by reading the manuals.
(the I/O of the 192 is on db 25 connectors)

Ce message a été modifié par Gert-Jan - dim. 17 avril 2005, 21:20.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Version bas débit - jeudi 28 mars 2024, 12:41
- © MacMusic 1997-2008