MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés

Alavillestudio

Profil
Photo personnelle
Avatar
Members

Newbie
Note
 
Options
Options
Pro Infos

Industrie de la Musique / Studios

STUDIO D'ENREGISTREMENT MUSIQUE (3 Cabines) , MIXAGE ,MASTERING , PARIS STUDIO A LA VILLE 4, cité Griset 75011 ParisTél. : 06 03 69 23 63/01 49 23 63 96 courriel: contact@studioalaville.com , http://www.studioalaville.com POUR : Les groupes ou formations ou chanteurs : de l'enregistrement du "définitif" à la maquette ou"démo". POUR : Les rappeurs (ou chanteurs "en démo") : Pose de voix sur instrus ou "playbacks" POUR : Les spectacles ou les "institutionnels" : Enregistrement de "speak" ou "bandes son" avec musiques d'illustration effets, bruitages etc. POUR : LES AMATEURS : qui veulent s'essayer à jouer à la "STARAC",chanter sur du playback(Karaoké),ou faire un CD cadeau à leurs amis(j'ai l'habitude de gérer des enregistrements"cadeau pour des amis") CONDITIONS 50 EUROS de l'heure TTC , ingénieur du son expérimenté compris
Infos personnelles
Masculin
Né(e) le 12 Mars 1977 (47 ans)
75011 PARIS
France
Alavillestudio n'a pas de présentation personnelle pour le moment.
Statistiques
Inscrit : 05 mars 10
Vus : 3,247*
Dernière visite : jeudi 26 déc. 2019, 15:48
Heure locale : ven. 29 mars 2024, 09:11
3 message(s) (0 par jour)
Contact
AIM Aucune information
Yahoo Aucune information
ICQ Aucune information
MSN Aucune information
* Le compteur est mis à jour chaque heure
Sujets
Messages
Blog
Commentaires
Amis
Mon contenu
7 Mar 2010
TASCAM X 48

Dear friends,

Let me introduce myself, I am a small recording and mixing music STUDIO in PARIS / FRANCE: http://www.studioalaville.com, and must be the only studio in the world to use the TASCAM X48 instead of ProTools !!!, too expensive for me in the pro version (HD with 16 simultaneous inputs + the mixer / remote, etc. .. etc. ..).

(sorry for my english)

I came first:
1 / ask for solutions for my problems
2 / evoke all that is missing unfortunately to work efficiently on this machine!
3 / Tell you about all my discoveries positive and negative

The X48 is the best machine I've seen so far in my niche of use: easy to record a rock band for instance , remaining available artistically and very precise for the audio editing based keyboard / mouse / screen-waveforms.
Unfortunately it comes with the worst manual I've met , a lot of things are not or poorly explained (the editing and import / export file .. which is the more complicated considering the subject and the restrictions of the machine , are all explained in 2 pages !!!!).
And all this , with a very poor and even non-existent support from the importer in Europe, who has no interest in this machine and do not know it at all!
In an audio show in Paris, the X48 was there in a corner, not trendy, a little dusty ... Brief shame!
And when we ask questions ... assuming we manage to reach them by phone or mail, or they do not know or they do not respond!
I tried to ask technical questions to Tascam USA by mail, they don’t want answer me and send me back to Europe Tascam importer! Back to square one!
I tried to ask the same questions SANEWAVE, no answer. In the forums, almost no info and nothing about my problems.


Here are my questions and unsolved problems:

Q - EXPORT WAV STEREO

I made a stereo mix recorded on tracks 47 and 48, and with the audio CD that I burn for my client, I want to give him this mix also as a WAV file burned onto CDs, so he can listen on a CD WAV (or load it in itunes), or listen on a USB key drive (or load it into his itunes easily from his key)
But when I export WAV files from X 48 tracks 47 and 48, CD stereotrack1 will have the WAV of track 47 and CD stereotrack 2 , the WAV of track 48, but the CD stéréo track 1, will not have WAV 47 to the left and that of the 48 right as I wish.
So how is it , to export two files of X48 tracks 47 and 48 consolidated form , as a single STEREO WAV file ,readable on wav players as “
Track 1 = 1st song..in stéréo ??

Q - INSERT INTO A CLIP AND PUSHING ALL WHICH FOLLOWS SIMULTANOUSLY

How to make a paste of a clip in a track , at a place determined by the read head and push all audio clips which are behind on the track,????
( therefore rejects everything that follows in the exact duration of the clip inserted)

NOW HERE IS A LISTING OF ALL MY DREAMS FLY!

Here , everything which are not possible with the existing system and would be so useful (unless of course something that has escaped me, in which case it would be cool to explain it to me!).

1 / I place my playhead to a edit point, I type on my keyboard I ,
I put my playhead further on another edit point, I type in O on my keyboard, and it's done ... .. automatically : an area to edit, copy, etc. .. is determined on the activated tracks ,unfortunately , this doesn’t work on EDIT mode !! it exists, but it only determines a Punch In / Punch Out point.

2 / Cannot "LOCK" (pair) 2 tracks (or 2 clips) adjacent to deal simultaneously crop / copy / cut . Every time ... I must reselect the second track to be sure to apply the same edit on the two tracks / clips.

3 / I read the project from a starting point whatever, I stop, I press the return key on my keyboard, and now I am back to the starting point of my last reading.
Simple isn’t it ??.. well …no ! , too simple for the X48, this is not possible!!!!
This requires reading from a Marker, and especially not to touch anything else .. unless the return on the marker by pressing the return key on the keyboard , does not work!

4 / No templates creation or management (patterns stored in memory that can be recalled , for instance the startpattern for recording a rock band.)
Example: I am preparing a project with all types of settings for rock band drums (names of tracks, loops, placement of markers, INPUT sources on each track, etc ...), I call it "ROCK TEMPLATE"
OK I record the band No. 1 and then SAVE AS
"the group name N° 1" and I have his file .ndr(X48) and AUDIO file .

Arrive another customer, another rock band, another day , I start with
" ROCK TEMPLATE " , record Band N° 2 , I SAVE AS “the group name N°2“ : BIG BIG PROBLEM: the audio of group No. 2 is in the same AUDIO FOLDER than group No. 1 !., which extremely complicates export or deletion of a group and not the other;
Indeed all “Under projects“ share the same AUDIO FOLDER.
You cannot create a “TEMPLATE PROJECT“.
I assure you, I worked on it for days, no help for it, even by creating a TEMPLATE in DATA does not work ,as far as an AUDO FOLDER is created in DATA , that contains all the files of clients I recorded starting with this “ DATA TEMPLATE“.
If you want for example delete (or export) the whole project of band 1 as wav files, you’ll have to enter into the audiofile list to delete those from band 1 and not those from band 2 ....

THEREFORE ADVICE:
Enable function “name the files from the project name "and especially not from “track name“, because in this case,we do not know which file belongs to which project!

WARNING: If you click 2 times on the AUDIO folder in Window "project", you’ll see nothing, nothing can be done on these files! You must go to "File Manager" to see the files and copy or delete!

The result of all this: Well I enter again settings and names for all the tracks to each new client or sometimes even song;
Very boring !!! Dur Dur!

Only a very few general settings can be memorized (like Sampling frequency for instance),in “settings“ menu .
To complete the templates problem, I see in DATA window a folder named TEMPLATES, in principle, should be precisely what I want : to memorize (record) configurations , patterns, …well ... ... NO INFO in the manual about this! Trop fort ! Too much!
I tried to find out by myself how to use it ... I give up, I have already spent over 2 months trying to discover everything that is not written in the instructions! Enough !

5 / ATTENTON LARGE TRAP!
I lost 3 days with that!
I desperately contacted support ... no reply as usual, forums etc ... nothing !
There is a function "trap" at the bottom in the EDIT menu, but only in mix mode (and as I do not use it ...), which is
“SELECTION ON ALL TRACKS“ .
You imagine , this function does not appear in the EDIT menu in normal mode (recording / editing), but it still applies in this mode !!!!!
Then you make a selection area in a clip and .... This area applies to all tracks ... how to disable ... we try ... nothing!!!! "
I discovered by chance that in MIX MODE this function was enabled! , I do not know how ! and found it also applied to the editing functions.

6 / CONNECTING AN EXTERNAL HARD DISK BACKUP

A half-page in the manual! In fact it was quite complicated:
I bought a La Cie 500GB.
Problem, it must be set and then we go in fifteen different windows, which I understood almost nothing.
After several tries, I've finally realized the need to partition the HDD to say what place allocated to any particular thing. Well I got there , the next time I'll know what to do.
You think the manual would have mentioned what I just explained on the PARTITION ?????.... course NOT! !

NOW THE GOOD THINGS THAT I HAVE DISCOVERED

because of course not or very little or poorly explained in the instructions!
This could be useful for you! Although some of these details are obvious to some of you!
If on your side you have made interesting discoveries in "editing", in particular, or have better solutions than those I'll expose you, thank you to let me know.

.####### 1 / FILE NAME

Incidentally, nowhere in the manual of course, we see an allusion or reference to the type of file generated by a project X48, so here's a list that will be useful for managing these files!:

A X48 PPROJET .ndr)
It contains an audio folder containing all audio files of all sub-projects (all SAVE AS), and a folder for each sub-project as .ndr


A SOUND CLIP in a project X48 is composed of two files:
. wav and. spk

A TRACK (or area) which has been consolidated appears as two files per consolidated track (or area)
_ren_00_.wav and _ren_oo.spk

A OPEN TL PROJECT appears in the form of .tl
We do not see it .tl immediately in the File Manager, you must double click on the project to appear inside :

- An AUDIO FOLDER : “audiofile“ (in addition to the audio file of the X48 project , the same copied?? Mystery ??? ) is displayed
- a TRACK FOLDER
- and a .tl FOLDER

A PROJECT AAF appears in the form of:. ... .aaf

Beware, it "uses" the audio file of the X48 project .ndr
So be careful when you make backup copies on a hard drive or other to check that the audio accompanying the project .ndr or .aaf or .tl. Better to save the whole project which contains its various versions, that venture to save the sub-projects independently or a version of the project independently.


######### 2/ ARBORESCENCE (sorry don’t know English name !)

Same, no explanation in the manual on the principles of the « tree », so I give you what I found:



1 st Level

ROOT list of locations and external media:

Double click on DATA (or your external hard drive for example), access to 2nd level


2nd Level

DATA : different folders: settings, audio system (including the templates !?).

Double click on Xproject: Access to 3rd level

3rd Level

XPROJECTS : We see the names of the projects.
You’ll see the extensions .ndr and ;tl only on the 4th level : "subproject" .
On this level you can see the .aaf extensions but you cannot open them (it is an export format but the X48 does not recognize it)

Double click on a project X48: Access to 4 th level

44th Level

SUBPROJECTS: ONE AUDIO FOLDER shared by all the recordings from this project + (x) X48 files, as much as we did the "SAVE AS".
(- If you double click on an Open TL then appear 3 folders: audiofile, trackfiles and .tl)

Double click on the audio file (only possible in the filemanager or “import audiofile“: access to 5th level


5th Level

We see the list of all files of clips, each with his .wav file and his .spk file , and may also contain consolidated files as _ren_


######### 3 / REMOTE

I bought the remote from JL Cooper ES 450 RS 422, it works "almost" well with the X48.
We can do SCRUB / SHUTTLE, return 7 locators, transport management.
The least:
• - We can not handle the track arms of course(only 2 first), and when you press the STOP button it goes into pause, and impossible to access with “Press again STOP button“ to stop, you will have to go through the "computer" Keyboard to go to STOP.
(when you are in “pause » you can’t do anything on the X48)
• - To return to a "Locator" place, you must first press the "GO TO", then it would have been much easier to press only LOCATOR 5 directly. ... Again, why do simple when you can make it complicated? , Appears to be the motto of some designers.
Despite that I find it very useful because I'm used to locate an edit point with the SCRUB functiun.

########## 4 / SCREEN

I found a MARVELOUS large screen for computers , 28 "to work with the X48, the HANS G: HG 281D (Full HD 1080p) and with this screen you are working in 1200 x 1980 with the X 48 ... happiness !!!!!

######### 5 / AAF EXPORT and IMPORT/EXPORT OF OPEN TL

The following may be obvious to you, but I have put 15 days to fully understand these procedees hardly explained in the manual!
Simple but good to remember , as far as you use a CD or DVD for backup , you don’t care of the destination support , as far as when you press “BACKUP“ button in the filemanager, of course, your files will go to the CD/DVD.

EXPORT in AAF or OPEN TL (in factwhat is open tl exactly,with which Workstation ca nit be recognized ?, I do not see it anywhere else?)

- First of all we must convert the X48 project . ndr , in .aaf project (or open .tl), via the function "Export Project":
Open the project, go to EXPORT PROJECT, choose .aaf (or. tl) and Save!
- Then it will be in "File Manager" for copy or export:
We find the project in .aaf (or opentl), as well as in X48 version .ndr which is still there, then you can copy either one or the other version of the project on CD / DVD by "BACKUP" or external hard drive or USB key, or even SD card inserted into a USB adapter , with "COPY", after of course selected the / export file and "open" the destination media, chosen by double clicking its name.

IMPORT OPEN TL

Conversely, if you must retrieve a project from the outer : OPEN TL (AAF not possible) will require first , the RESTORE (DVD)/ COPY (HARDDRIVE) from external support to the X48, with the FILE MANAGER, then in a second time convert .tl project. to .ndr X48 in “IMPORT PROJECT“!


####### 6 / SPECIAL IMPORT OF WAV

We will use this time :IMPORT AUDIO FILE
• Prepare a project "Receiver" (or "cradle" ?), turn on Track 1 (becomes blue), move the playhead to where you want the files start (at 0 or 1 minute for example), and leave the project open.
• The first imported file will be placed on the first track "blue" (activated) at the position of the playhead.
• The second file will be imported on the next track at the same time address, and so on (if you have enabled "import to current playback position",inside “import audiofile“ window)
• OK Jump in AUDIOFILE IMPORT function, and highlight the wav files to import, and OK
• So if you want to import multiple wav files on the same track, you will import 1 by 1, by changing the "current position" of the playhead each time(unless you "crush" the previous file).
For example if you want to import multiple tracks as stereo wav files from a USB stick , and place them one behind the other on the same 2 tracks , must first import the first stereo wav file that will be put on track 1 and 2 (if you have highlighted the track 1 of the project recipient) or track 23 and 24 (if you have highlighted the track 23!), then import the second stereo wav file , taking care to place the playhead after the end of the first imported file! and so on, phew!

######### 7 / SPECIAL EXPORT OF WAV

• First “consilidate“ tracks in the project for 1 track = 1 file.
• you select (highlight) all tracks of the whole project, and it goes according CONSOLIDATE.
• These new files will appear in the file manager in the Audio folder of the project as:
nameoftheproject_track1_ren_00.wav and
nameoftheproject _track1_ren_00.spk
(This is the _ren_ which characterise (signify) consolidated files)
You will export only wav files, I made it, it works. To retrieve the files elsewhere, there is no need to copy .spk. (Unless you have other info about this?)
• Go to the File Manager, highlight the files _ren_ to export
And use BACK UP to copy to CD / DVD or COPY for other media.

For “COPY “
(thinking to appear in the area to the right of the file manager, where you will export files , opening the destination support by double clicking on its name)




########## USEFUL INFO

Often we discover many things with a double click:
Example, double clicking on the AUDIO folder in the Project window you can see nothing! it's scary! Well no , it's normal for the X48, you will go to the File Manager, double click on the AUDIO folder to view files .WAV!

########## 8 / COPYING PROJECT IN ANOTHER (its only audio files. Copy a project with all its "history" not possible or I didn’t find it!)
We must first make the process of consolidation in the "SOURCE" project (as in the export of WAV files), then open the"DESTINATION" project, by placing the playhead where you want to copy the source project files , and highlight the track where you will place the first source project file (as in the procedure of export wav)
Then go to IMPORT AUDIO FILE, and highlight the source project consolidated files you want to import inside the destination project,and OK.

########## 9 / CHANGE OF NAME

In the file manager you can change a project name by double clicking on it (but beware : the old files will have the old name and new recordings or files will have the new name, it can be confusing),
You can also change the name of an audio file.

Well I stop there and I'll buy a ProTools ... ... I'm just joking!

Jack

http://www.jacquesportet@laposte.net

Fichier(s) joint(s)
Fichier joint  P1030036.JPG ( 591,48 Ko ) Nombre de téléchargements: 0
 
5 Mar 2010
X 48 TASCAM


Chers amis,

Laissez moi me présenter,je suis un petit studio d'enregistrement et de mixage musique à PARIS/FRANCE, et dois être le seul studio au monde à utiliser le TASCAM X48 au lieu du PROTOOLS , trop cher pour moi dans sa version pro (HD avec 16 entrées simultanées + la table de mixage / télécommande , etc ..etc..).
Je suis venu d'abord :

1/ vous demander des conseils

2/ évoquer tout ce qui manque malheureusement pour bien travailler efficacement sur cette machine !

3/ vous faire part à mon tour de toutes mes découvertes positive et négatives



Le X48 est la meilleure machine que j'aie connu jusqu'à présent pour mon créneau d'utilisation : facile pour enregistrer un groupe de rock en restant disponible artistiquement et précise pour faire du montage audio à base de clavier / souris / écran-formes d'ondes.

Malheureusement elle est livrée avec le pire mode d'emploi que j’aie rencontré, énormément de choses ne sont pas ou mal expliquées (l'editing et l'import/export de fichiers ..c'est le plus compliqué étant donné le sujet et les restrictions de la machine et tout cela expliqué en 2 pages!!!!).

Et tout ça avec un très mauvais et même inexistant support de le part de l'importateur en Europe , qui ne s'intérèsse absolument pas à cette machine , ne la connait pas !

Dans un salon audio sur Paris , le X48 était là dans un coin , pas branché , un peu poussiéreux ... bref la honte !

Et quand on pose des questions ,...en admettant qu'on arrive à les joindre par téléphone ou mail , soit ils ne savent pas , soit ils ne répondent pas !

J'ai essayé de poser des questions techniques à Tascam USA par mail , ils ne veulent pas me répondre et me renvoient vers Tascam Europe ! retour à la case départ!!

J'ai essayé de poser les mêmes questions à SANEWAVE , pas de réponse .

Dans les forums, quasiment pas d'infos et rien sur mes problèmes rencontrés.

Voici mes questions et problèmes non résolus :

Q - EXPORT WAV STEREO

J'ai fait un mix stéréo enregistré sur les pistes 47 et 48 , et en plus du CD Audio que je grave , je veux remettre ce mix à mon client sous forme de fichier WAV gravé sur CD , pour qu'il puisse l'écouter sur un lecteur de CD WAV (ou le charger dans son itunes),ou l'écouter sur un lecteur-clé USB (ou le charger dans son itunes facilement à partir de sa clef)

Or quand j'exporte les fichiers WAV des pistes 47 puis 48 , la plage 1 aura le WAV de la piste 47 et la plage 2 le WAV de la piste 48 , mais la plage 1 n'aura pas le WAV de la 47 à gauche et celui de la 48 à droite comme je le souhaiterais.

Donc comment fait on pour exporter les deux fichiers des pistes 47 et 48 consolidées sous forme de fichiers WAV STEREO ???

Q - INSERER UN CLIP EN REPOUSSANT

Comment faire un PASTE d'un clip ,dans une piste , à un endroit déterminé par la tête de lecture et qui repousse tous les clips audio situés derrière sur toute la piste ,????(donc repousse tout ce qui suit, de la durée exacte du clip inséré)

MAINTENANT VOICI UN LISTING DE TOUS MES REVES ENVOLES !

Voici tout ce qui ce n'est pas possible avec l'OS actuel et qui serait tellement utile (à moins bien sûr que quelquechose m’ait échappé , auquel cas ce serait sympa de m’expliquer !

1/ Je place ma tête de lecture sur un point de montage , je tape I sur mon clavier

je place ma tête de lecture plus loin sur un autre point de montage , je tape sur O sur mon clavier,et c'est fait….. ,automatiquement une zone à éditer , copier ,etc ..est déterminée sur les pistes activées.Malheureusement cela ne marche pas en EDIT ,ça existe , mais ça détermine uniquement un point de Punch IN et un point de Punch OUT.

2/ Impossible de "LOCKER" (coupler) 2 pistes(ou 2 clips) adjacentes pour les traiter simultanément en "cropper" / copier / couper,...à chaque fois il faut resélectionner la deuxième piste pour être sûr d'appliquer les mêmes changements d'edit aux deux pistes / clips.

3/ Je lis le projet à partir d'un point de départ quel qu'il soit, je stoppe , j'appuie sur la touche retour sur mon clavier,et voilà je me retrouve au point du départ de ma dernière lecture.

C'est simple n'est-ce pas ..eh bien non trop simple pour le X48, ce n'est pas possible !!!

Il faut pour cela lire à partir d'un Marker , et surtout ne toucher à rien d'autre ,..sinon le retour sur le marker en appuyant sur la touche retour du clavier ne fonctionne pas !!!



4/ Très mauvaise gestion des gabarits(configurations stockées en mémoires que l’on peut rappeller pour partir d’une configuration typique par exemple de l’enregistrement d’un groupe de rock.)



Exemple : Je prépare un projet avec tous les réglages types d'une batterie de groupe de rock(nom des pistes,boucle,placement de markers,sources INPUT sur chaque piste ,etc... ),je le nomme "GABARIT ROCK"

OK j'enregistre le groupe de rock n°1 , puis SAVE AS "le nom du groupe"et j'ai son dossier AUDIO et son dossier X48.

Arrive un autre client, un autre groupe de rock,un autre jour,je repars du "GABARIT ROCK", je SAVE AS le nom du groupe 2 : GROS GROS PROBLEME : l'audio de ce groupe N° 2 sera dans le même dossier audio que le groupe N°1 , ce qui complique à l'extrême l'exportation ou l'effacement d'un groupe et pas de l'autre;

En effet tous les sous projets partagent le même dossier audio , on ne peut donc pas créer un PROJET GABARIT . Je vous assure , j'ai planché là dessus des journées entières , pas moyen de faire autrement ;Même en créant un GABARIT au niveau DATA ça ne marche pas , car un dossier AUDIO est créé au niveau DATA qui contiendra tous les fichiers des clients que j’aurai enregistré en partant de ce gabarit DATA.

Si on veut par exemple effacer ou exporter tout le projet d'un groupe , en fichiers wav , il faudra rentrer dans la liste des fichiers pour effacer ceux du groupe 1 et pas ceux du groupe 2 ....DONC UN CONSEIL : activez la fonction "- nommer les fichiers à partir du nom du projet “ et surtout pas à partir du nom de la piste , car on ne sait plus à quel projet appartient quel fichier !!!

ATTENTION : Si on clique 2 fois sur le dossier AUDIO en fenêtre "projet", on ne voit rien , on ne peut rien faire sur ces fichiers!! Il faut aller en "FILE MANAGER" pour voir les fichiers et les copier ou effacer !


LE RESULTAT DE TOUT ça : Eh bien je me farcis les réglages et noms de toutes les piste à chaque nouveau client ou même morceau parfois ; Dur ,Dur !

Pour terminer sur les gabarits , je vois en fenêtre DATA un dossier nommé TEMPLATES , en principe c’est justement ce que je recherche pour préparer des configurations de travail , en bien……AUCUNE INFO dans le manuel à ce propos ! Trop fort ! j’ai essayé de découvrir par moi même comment m’en servir...je renonce , j’ai déjà passé plus de 2 mois à essayer de découvrir tout ce qui n’est pas marqué dans le mode d’emploi ! ça suffit .



5/ ATTENTON GROS PIEGE ! qui m’a fait perdre 3 jours !

J’ai désespérément contacté le support …pas de réponse comme d’habitude,les forums etc… rien :

Il y a une fonction « piège » tout en bas dans le menu déroulant EDIT, mais seulement en MODE MIXAGE (et comme je ne m’en sers pas …),qui est

“SELECTION ON ALL TRACKS“ .

Figurez vous que cette fonction n’apparaît pas dans le menu EDIT, en MODE NORMAL (enregistrement/montage),mais qu’elle s’applique quand même dans ce mode !!!!!

Alors vous faites une sélection de zone dans un clip et….cette zone s’applique à toutes les pistes … comment désactiver …on cherche … ;rien !!!!

Il a fallu que par hasard je découvre que en mode MIXAGE cette fonction était activée !! , je ne sais pas comment ? et qu’elle s’appliquait aussi aux fonctions d’édition .



6 / BRANCHEMENT D’UN DISQUE DUR EXTERNE DE SAUVEGARDE

Une demi-page dans le mode d’emploi !En fait cela a été assez compliqué :
J’ai acheté un La Cie 500 Go .
Problème , il faut le configurer et là on rentre dans une quinzaine de fenêtres différentes,auxquelles je ne comprenais pratiquement rien . Après plusieurs essais ,j ‘ai enfin compris qu’il fallait partitionner ce Disque Dur pour lui dire quelle place allouer à tel ou tel truc . Bon j’y suis arrivé et la prochaine fois je saurai quoi faire . Vous croyez que le mode d’emploi aurait évoqué ce que je viens d’expliquer concernant la PARTITION ?????.... NON bien sûr !!!

MAINTENANT LES BONNES CHOSES QUE J’AI DECOUVERTES



car bien sûr pas ou mal ou très peu expliquées dans le mode d’emploi !

Cela pourra peut être vous servir ! Bien que certaines de ces infos soient évidentes pour certains d’entre vous !

Si de votre côté vous avez fait des découvertes intéressantes en « editing » , notamment , ou avez de meilleures solutions que celles que je vais vous exposer,merci de m’en faire part.

####### 1 / NOMS DES FICHIERS

A propos ,nulle part dans le mode d’emploi bien sûr , on ne voit une allusion ou mention du type de fichier généré par un projet X48,donc voici une liste qui vous sera pratique pour la gestion de ces fichiers ! :

Un PPROJET X48 , c’est du .ndr ; Il contient un dossier audio contenant tous les fichiers audio de tous les sous-projets (tous les SAVE AS),et 1 dossier par sous-projet en .ndr


Un CLIP AUDIO dans un projet X48 est composé de deux fichiers :

.wav et .spk

Une PISTE(ou zone consolidée) qui a été CONSOLIDEE apparaît sous forme de deux fichiers par piste (zone consolidée)

_ren_00_.wav et_ren_oo.spk


Un PROJET en OPEN TL apparaît sous forme de .tl

On ne voit pas le .tl tout de suite dans le File Manager , il faut double cliquer sur le projet pour voir apparaître le contenu d’un open TL :

1 dossier AZUDIO : audiofiles (en plus du dossier audio du projet X48) le même copié ???mystère

1 dossier track files

et 1 dossier .tl


Un PROJET en AAF apparaît sous forme de : .aaf … c’est tout .

Attention ,il “se sert “ du dossier audio du projet X48 .ndr
Donc attention quand on fait des copies de sauvegardes sur un disque dur ou autre , à bien vérifier que les fichiers audio accompagnent le projet en .ndr ou .aaf ou .tl. Mieux vaut sauvegarder tout le projet qui contient ses différentes versions, que s’aventurer à sauvegarder les sous projets indépendamment ou une version du projet indépendamment .

######### 2/ ARBORESCENCE

Idem ,aucune explication dans le manuel sur les grands principes de l’arborescence de la machine , donc je vous livre ce que j’ai identifié :

1er Niveau

ROOT liste des emplacements et supports externes :

Double clic sur DATA (ou sur votre disque dur externe par exemple) , accès à 2 ème niveau


2ème Niveau

DATA différents dossiers : settings,audio,system(dont le templates ?).

Double clic sur XPROJECTS : Accès au 3 ème niveau

3ème Niveau

XPROJECTS On voit le nom des projets. On ne voit les .ndr et les .tl qu’au niveau “ sous projet‹“ seulement , par contre les .aaf se voient mais on ne peut

pas les ouvrir (c’est un format d’export mais le X48 ne les reconnaît pas ),

Double clic sur un projet X48 : Accès au 4 ème niveau

4ème niveau

SOUS PROJETS : 1 dossier AUDIO partagé par tous les enregistrements faits à partir de ce projet + (x) dossiers X48 , autant que l’on a fait de “ SAVE AS“.

( - En cas de double clic sur un PROJET OPEN TL on voit alors apparaître 3 dossiers : audiofiles , trackfiles et .tl)


Double clic sur le dossier audio (seulement possible dans le filemanager ou import audiofiles) : accès au 5 ème niveau


5ème niveau

On voit la liste de tous les fichiers de clips , chacun avec 1 fichier .wav et un fichier .spk, et il peut aussi contenir les fichiers consolidés en .ren


######### 3/ TELECOMMANDE



J’ai acheté la télécommande de JL COOPER ES 450 RS 422 , elle fonctionne « presque » bien avec le X48 .
On peut faire du SCRUB/SHUTTLE , rentrer 7 locators, gérer le transport .
Les moins :
- On ne peut pas gérer les armements de pistes bien sûr , et quand on appuie sur la touche STOP ça passe en pause , et impossible d’accéder au STOP en réappuyant sur la touche STOP , il vous faudra repasser par le clavier « ordinateur » .

- - Pour retourner à un point de « Locator »,il faut d’abord appuyer sur la touche « GO TO » , alors qu’il aurait été tellement plus simple d’appuyer seulement sur LOCATOR 5 directement ….encore une fois ,pourquoi faire simple quand on peut faire compliqué ? , semble être la devise de certains concepteurs .
Malgré ça je la trouve très utile car je suis habitué au repérage d’un point de montage par le SCRUB .

########## 4 / ECRAN

J’ai trouvé un « grand » écran informatique GENIAL de 28“ pour travailler avec le X48 , c’est le HANS G : HG 281D ( Full HD 1080p ) et avec cet écran on travaille en 1200 x 1980 avec le X 48 …un bonheur.

########## 5/ EXPORT AAF ou IMPORT/ EXPORT D’OPEN TL

Ce qui suit est peut être évident pour vous, mais moi j’ai mis 15 jours à bien comprendre ces procédées quasiment pas expliqués dans le manuel !

Au fait un truc tout bête , quand on sauve sur un CD/DVD,il n’y a pas à chosir le support de destination, puisqu’à partir du moment où on presse sur “BACKUP“ , ça va forcemment vers le DVD !
COPY dans le filemanager c’est pour aller vers un disque dur (ou assimilé)
BACKUP c’est pour aller vers un CD/DVD
Ça paraît idiot mais au début , j’essayais de copier sur le DVD en passant par le bouton COPY !!! Eh oui on a parfois de ces faiblesses !!!

EXPORT en AAF ou OPEN TL (au fait c’est quoi l’open tl , je ne vois ça nulle part ailleurs ?)
- Tout d’abord il faut convertir le projet X48 .ndr , en projet AAF ( ou open tl) ,en passant par la fonction « EXPORT PROJECT » : Ouvrir le projet , aller à EXPORT PROJECT , choisir .aaf ( ou .tl )et Save !

- Puis ce sera dans « FILE MANAGER » que la copie ou exportation se fera réellement ! :

On retrouve le dossier .aaf (ou opentl) , ainsi que sa version X48 en .ndr qui est toujours là , on peut alors copier soit l’une , soit l’autre version du projet , sur CD/DVD par “BACKUP“ , ou sur Disque dur externe ou clef USB, ou même carte SD insérée dans un adaptateur USB, par “COPY“ , après avoir bien sûr sélectionné le dossier/fichier à exporter et « ouvert »le support de destination , choisi en double cliquant sur son nom.

IMPORT OPEN TL :

Inversement, si on doit récupérer un projet venant de l’extérieur en OPEN TL (AAF pas possible),il faudra d’abord le RESTORE /COPY depuis le support externe vers le X48 , par le FILE MANAGER , puis dans un deuxième temps le convertir en projet .ndr X48 , dans IMPORT PROJECT !

####### 6/ SPECIAL IMPORT DE WAV



Alors là on ne passe plus par import project , bien sûr mais par IMPORT AUDIO FILE

- Préparer un projet « receveur » (ou « berceau »), activer la piste 1 (en bleu),placer la tête de lecture à l’endroit où l’on voudra que les fichiers démarrent (au 0 ou 1 minute par exemple),et laisser ce projet ouvert.

- Le premier fichier importé ira se placer sur la première piste « bleuie »(activée) , à l’adresse de la position de la tête de lecture.

- Le deuxième fichier importé ira sur la piste suivante à la même adresse temporelle , et ainsi de suite (si on a activé “ import to current playback position “)

- Aller en fonction IMPORT AUDIOFILE , et surligner les fichiers wav à importer , et OK

- Donc , si on veut importer plusieurs fichiers wav sur la même piste, il faudra les importer 1 par 1,en changeant la « current position » de la tête de lecture à chaque fois (sinon on « écrase » le fichier précédent).

Par exemple si on veut importer plusieurs morceaux sous forme de fichiers wav stéréo à partir d’une clef USB , et les placer les uns derrière les autres sur les 2 même pistes il faudra d’abord importer le premier fichier wav stéréo qui ira se placer sur les piste 1 et 2 (si on a surligné la piste 1 du projet « receveur) ou piste 23 et 24 (si on a surligné la piste 23 !),puis importer le deuxième fichier wav stéréo en ayant pris soin de placer la tête de lecture après la fin du premier fichier importé ! et ainsi de suite, ouf !

######### 7/ SPECIAL EXPORT DE WAV

- Tout d’abord consolider les pistes du projet pour que 1 piste = 1 fichier .

- on sélectionne (surligne) toutes les pistes de tout le projet , et on va en fonction CONSOLIDATE . Ces nouveaux fichiers apparaîtront dans le file manager dans le dossier Audio du projet sous forme de :

nomduprojet_track1_ren_00.wav et nomduprojet_track1_ren_00.spk .
(C’est le _ren_ quj fait la caractéristique des fichiers “consolidés“)

On n’exportera que les .wav,je l’ai fait ça marche. Pour récupérer les fichiers ailleurs , on a pas besoin des .spk .(à moins que vous n’ayez une autre info à ce sujet ?)
- Aller dans le FILE MANAGER , surligner les fichiers _ren_ à exporter ,
BACK UP pour copier sur CD/DVD ou COPY pour les autres supports.
(penser à faire apparaître dans la zone de droite du file manager le support dans lequel vous allez exporter vos fichiers en l’ “ouvrant “ en double cliquant sur son nom)

########## INFO UTILE

Souvent on découvre beaucoup de choses avec le double clic :
Exemple , en double cliquant sur le dossier AUDIO dans le fenêtre projets on ne voit rien !!! ça fait peur ! eh bien non c’est normal pour le X48 , il faudra aller dans le FILE MANAGER , double cliquer sur le dossier AUDIO pour voir les fichiers .WAV !!

########## 8 / COPIER UN PROJET DANS UN AUTRE (ses fichiers pistes audio seulement . Copier un projet avec toute sa « HISTORY » : pas possible ou bien j’ai pas trouvé !)

Il faut faire d’abord la procédure de CONSOLIDATION dans le projet « SOURCE » (comme dans l’export de WAV) , puis ouvrir le PROJET « DESTINATION », en plaçant la tête de lecture là où on veut copier le projet source et en surlignant la piste où va se placer le premier fichier du projet source (comme dans la procédure d’export wav)
Puis aller dans IMPORT AUDIO FILE , surligner les fichiers consolidés du projet source et OK.

########## 9 / CHANGEMENTS DE NOM

Dans le file manager on peut modifier un nom de projet en double cliquant dessus (mais attention les anciens fichiers auront l’ancien nom et les nouveaux enregistrements ou fichiers auront le nouveau nom , ça peut prêter à confusion) , on peut aussi modifier le nom d’un fichier audio .


Bon j’arrête là et je vais m’acheter un PROTOOLS …… NON JE PLAISANTE !!!



http://www.jacquesportet@laposte.net

Fichier joint  P1030031.JPG ( 658,08 Ko ) Nombre de téléchargements: 11
Derniers visiteurs


lundi 20 décembre 2010 à 22:38


mercredi 31 mars 2010 à 15:41

Commentaires
Les autres utilisateurs n'ont laissé aucun commentaire pour Alavillestudio.

Amis
Il n'y a aucun ami à afficher.
Version bas débit - vendredi 29 mars 2024, 08:11
- © 440 Forums 2011