  |
 Dp 4.12 Not Receiving Audio Signal |
  jeu. 8 juil. 2004, 15:18
Message
#1
|
|
 Rookie  Groupe : Members Messages : 47 Inscrit : 19 mai 03 Lieu : Lewisberry - US Membre no 18,134  |
I know I posted a similar question the other day but now that the problem has truely solidified itself into a bigger problem I definately need some help with it now.
My setup G4 Mac OS 10.3.2 DP 4.12 with GPO MOTU micro express interface Roland JV-1010 Triton Le Alesis MultiMix 6FX Tascam US-122 The audio outs from my modules are going into the Mixer and from the mixer 1/4" outs to the US-122. I can see the US-122 receiving the audio but in DP the audio track is not receiving and signal. Likewise with my Shure SM57 mic. I am pretty new to this version of DP and still feeling out how they rearranged everything. I'd be REALLY greatful for any advice! Thanks! Clo |
 |
 
|
 jeu. 8 juil. 2004, 17:10
Message
#2
|
|
 Maniac Member Groupe : Members Messages : 899 Inscrit : 12 oct. 01 Lieu : Kirkland Membre no 2,002 |
Have you configured the audio bundle window to reflect you interface, choose the correct driver in audio setup.
Check to see what output/input is selected for the individual track. If you let your computer sleep, sometimes USB devices don't wakeup, and may have to be reinitialized. 
-------------------- G-Dub
|
|
|
|
|
ven. 9 juil. 2004, 11:25
Message
#3
|
|
 Member Groupe : Members Messages : 80 Inscrit : 04 juin 03 Lieu : PULLY - CH Membre no 19,087 |
Hi Dimora,
I just thought about something: do you have the last drivers? version 3.2.3 is available at www.tascam.com. then just check if in the control panel of the US 122 if the "MIDI and AUDIO enabled " is checked. sometimes it just switch to "Midi enabled, audio disabled" after a crash . feel free to contact me if you have any question cheers. 
-------------------- tsagadatsointsoin...
|
|
|
|
|
jeu. 15 juil. 2004, 05:13
Message
#4
|
|
|
Newbie Groupe : Members Messages : 1 Inscrit : 15 juil. 04 Lieu : Boston - US Membre no 46,949 |
I assume the US-122 is your digital/analog interface, yes?
Make sure of all these things: 1. The US-122 is selected in the Configure Hardware Driver window. 2. The US-122 is selected in the Audio portion of the Audio/MIDI set-up window. 3. The US-122 channels are assigned inputs in the Audio Bundles window. 4. The correct US-122 channels are selected on the inputs of the audio tracks you wish to record on. Here's what I do to monitor the audio: Send the output of the audio track to (for example) bus 1-2. Then create an aux track w/ the input being bus 1-2, the output going to your main out or monitor channel. This way I can monitor the audio input, not just the recorded output. Hope this helps. |
|
|
|
|
ven. 16 juil. 2004, 14:42
Message
#5
|
|
|
Rookie Groupe : Members Messages : 47 Inscrit : 19 mai 03 Lieu : Lewisberry - US Membre no 18,134 |
I have to shamefully admit that I had some cable wiring problems that I just didn't notice
 Sorry, that was a waste of time for all these excellent answers.  Although thanks for reminding me about the Aux track tip! *walks away sheepishly*
|
|
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
