  |
 Degraded Raid Set, Can I fix it? |
 sam. 10 avril 2004, 03:31
Message
#1
|
|
 Newbie Groupe : Members Messages : 5 Inscrit : 17 oct. 03 Lieu : Culver City - US Membre no 26,955  |
Uh oh...
Firstly, I am a novice and have inherited this Mac which is great and all but.... I have a G4 dual processor with a mirrored RAID drive. Disc Utility says that it's status is "Degraded". Both drives that make up the RAID set also show their status as "Degraded". Am I screwed? Can I fix this and how? Thanks jfitz |
 |
 
|
|
sam. 10 avril 2004, 10:36
Message
#2
|
|
 Moderator  Groupe : Team Messages : 370 Inscrit : 19 mars 03 Lieu : Umeå - SE Membre no 14,645 |
It is usually possible to rebuild the array.
That is - copy the raid-info - from the fresh drive to damaged drive. I havent tried this on a Mac though. QUOTE The raidtools usually allow you to - remove one or the other drive - from your mirrored raid-setup. (at least on a PC with a proper raid-card). When you remove the faulty drive from the raid-setup you'll get a warning that the setup is NO LONGER FAULT tolerant - but your computer will still be able boot on the functioning drive. Removing the the fresh drive from the raid-setup will stop your computer from finding the boot-drive and a functioning system. In the raid tools you MUST choose to rebuild your mirrored configuration from the fresh drive to the faulty drive. All the above is done the bios/firmware of the raid-card controller on a PC. However on a Mac OS-X machine I would try to boot the computer from the Panther/Jaguar boot CD start installation - BUT go to the Apple menu and choose the Disktool and try to repair the mirrorored raid setup. I havent tried this on a Mac though so I dont know if it will actually work. Try to backup/copy your important docs FIRST - before you try this. Cheers: Dixiechicken -------------------- ==================
Oh my god it's full of stars… --------------------------------------------------- Mac-G5-2x.2.0, OS-X 10.5.1, 250/200Gb HD - 7.0Gb ram DP-5.13, Motu 828 MK-II, MTP AV Usb, ltst drvs, Kurzweil-2000, EPS-16, Proteus-2000, Yamaha 01V Emes Kobalt monitors ================================ |
|
|
|
 jeu. 22 avril 2004, 04:28
Message
#3
|
|
 Rookie  Groupe : Members Messages : 48 Inscrit : 01 oct. 03 Lieu : Detroit - US Membre no 25,829 |
Hey jfitz, any luck?
|
|
|
|
|
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
