  |
 disk fragmentation and Protools, I can't record because of hard drive? |
 sam. 1 déc. 2001, 14:07
Message
#1
|
|
|
Groupe : Messages : 0 Inscrit : -- Membre no 0  |
My mac powerbook G3 suddenly won't let me record in protools. When I put it in record mode and press play it says ' can't perform that function. Disk may be fragmented.'
I have about 900 MB of hard drive space left; I know I need more, but I had been using protools for a while with less. I opened a new session to try again, and it let me record if I used the crappy built in mic (just snapping my fingers near mic hole.) But it didn't work if I used the sound input port like usual. It gave the same message. When I closed the session-- not having saved any audio at all-- the file took up over 800 MB, with nothing recorded. I threw it away and got my hard drive space back, but I really need to use protools this weekend. Any suggestions? (especially if there was some cheap and fast solution) Thank you, jess |
 |
 
|
|
sam. 1 déc. 2001, 14:14
Message
#2
|
|
|
Groupe : Messages : 0 Inscrit : -- Membre no 0 |
A correction: The message when I try to record reads :'unable to allocate disk space. Disk may be fragmented'
If I need to run defragmenting software, what might be cheapest? Is there another solution? -jess |
|
|
|
|
mar. 4 déc. 2001, 19:14
Message
#3
|
|
|
Groupe : Messages : 0 Inscrit : -- Membre no 0 |
I'm not at home to see exactly where it is, but in the preferences there's a disk or time allocation setting and yours set to 'unlimited' or 'open ended' or something like that. If you'll specify a time (like 6 minutes) your problem will go away. Pro Tools will see plenty of 6 minute blank chunks on your hard drive and let you cut your parts.
|
|
|
|
|
lun. 10 déc. 2001, 04:36
Message
#4
|
|
|
Groupe : Messages : 0 Inscrit : -- Membre no 0 |
You need to defragment your harddrive. Go get Nortons Utilities it should do the trick, but back up important data first.
|
|
|
|
|
mar. 11 déc. 2001, 21:36
Message
#5
|
|
|
Groupe : Messages : 0 Inscrit : -- Membre no 0 |
Look for this. In ProTools, under the Set-up menu, record/playback. Go in here, and lower the buffer size. This should clear up the problem. If it's not exactly where I said it was, I apologize. The option is in there somewhere.
|
|
|
|
|
mer. 12 déc. 2001, 00:08
Message
#6
|
|
 Newbie Groupe : Members Messages : 8 Inscrit : 03 juil. 01 Lieu : Baltimore Membre no 1,155 |
Don't forget to set the recording length before you record! If not, ProTools assumes that it has to reserve your whole hard drive for recording, thus providing the defragmentation error message. If you set the recording length to 5 min or so, you should be good to go. Hope this helps!
|
|
|
|
|
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
