  |
 UC-33 doesn't run the faders in PT M-powered 7.4 |
 lun. 25 févr. 2008, 12:41
Message
#1
|
|
 Member  Groupe : Members Messages : 56 Inscrit : 10 juil. 05 Lieu : San Francisco - US Membre no 67,641  |
I have a qusetion that has been painfully bothering me for years now: Is there any way I can get my UC-33 from (evolution) to run my faders in Pro Tools ?? Or do I have to purchase an NRV-10 or Project Mix just to perform this simple task ? I'm running M-Powered 7.4.
Also, from time to time, in 7.4 I occasionally get an error message regarding my sample rate ( 44.1 ) that is not allowing 7.4 to record. When I change the sample rate to 48000 on my firewire interface, it works fine. Is that a glitch ? Have I missed something ? I contacted Digi and M Audio and they basically said: that's not right. But, unfortunately, were not able to give me a practical answer or work around. Thanks for the reply in advance -- especially if you can preserve any more of my hair that I seem to be pulling out over this . . . |
 |
 
|
|
jeu. 28 févr. 2008, 00:02
Message
#2
|
|
 Senior Member Groupe : Members Messages : 273 Inscrit : 13 oct. 07 Lieu : SAINTE MAR - FR Membre no 95,823 |
hi,
protools only work with HUI (human unit interface ) protocol. try BCF 2000.. isla |
|
|
|
|
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :
