MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
Bienvenue invité
 
Reply to this topicStart new topic
> M-audio Fw 410 Hotplugging?
glimmer
posté ven. 20 janv. 2006, 01:01
Message #1


Newbie


Groupe : Members
Messages : 2
Inscrit : 20 janv. 06
Lieu : Petaluma - US
Membre no 75,568




Hi, I'm a newcomer here with a question about M-Audio FW 410. M-Audio says you should never hotplug the 410 into your Mac but should power down the computer, plug in the FW 410, turn it on, then turn on the computer. Also, when you're done with the 410 you should pwoer down and then unplug it from the computer FW port.

This seems extreme, and I have some friends who say they don't bother to power down to use the FW 410.

How do you guys here use the FW 410? Just plug it in and go? Or do you follow M-Audio's advice? Thanks.
Go to the top of the page
 
+Quote Post
ghess
posté ven. 20 janv. 2006, 14:08
Message #2


Rookie
*

Groupe : Members
Messages : 32
Inscrit : 01 août 02
Lieu : Mt. Pleasant - US
Membre no 6,442




This is a Firewire issue. If you are bus powering devices, you can generate a spark that will fry your Firewire port. If you are using the external power supply it isn't a problem and you can hot swap.
Go to the top of the page
 
+Quote Post
glimmer
posté ven. 20 janv. 2006, 17:34
Message #3


Newbie


Groupe : Members
Messages : 2
Inscrit : 20 janv. 06
Lieu : Petaluma - US
Membre no 75,568




Thanks for the response. Yes, I'm bus-powering the device using a six pin FW cable. My thought was to plug in the device with the computer on but the device turned off. Then once plugged in, turn on the device.

Even in that scenario you'd consider there to be a danger from a spark as you describe?
Go to the top of the page
 
+Quote Post
ghess
posté sam. 21 janv. 2006, 13:56
Message #4


Rookie
*

Groupe : Members
Messages : 32
Inscrit : 01 août 02
Lieu : Mt. Pleasant - US
Membre no 6,442




yes, that could still cause problems If you want to hot swap, use the wall wart. That way there's no power going through the FW port
Go to the top of the page
 
+Quote Post
mortalengines
posté sam. 21 janv. 2006, 23:58
Message #5


Advanced Member
*****

Groupe : Members
Messages : 479
Inscrit : 08 mai 05
Lieu : Portland - US
Membre no 65,373




I would listen to whatever the manufacturer says since doing anything other than what they say wil void your warranty.
Go to the top of the page
 
+Quote Post
lepetitmartien
posté dim. 22 janv. 2006, 00:41
Message #6


Moderator In Chief (MIC)
Icône de groupe

Groupe : Editors
Messages : 15,189
Inscrit : 23 déc. 01
Lieu : Paris - FR
Membre no 2,758




And there's been a few horror stories upon fried FW ports due to not protected enough ports on some hardware. sad.gif

Play it safe, M-Audio was among the few with issues unfortunately. huh.gif


--------------------
Our Classifeds • Nos petites annoncesTerms Of Service / Conditions d'UtilisationForum Rules / Règles des ForumsMacMusic.Org & SETI@Home
BOING BUMM TSCHAK PENG! Are you musician enough to write in our Wiki?
BOING BUMM TSCHAK ZZZZZZZZZZZOING! Êtes-vous assez musicien pour écrire dans le Wiki?
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Version bas débit - mardi 24 déc. 2024, 15:18
- © MacMusic 1997-2008