Help Me Get Set-up |
mer. 21 avril 2004, 14:55
Message
#1
|
|
Rookie Groupe : Members Messages : 33 Inscrit : 02 avril 04 Lieu : Gutild - DE Membre no 40,050 |
Hi i'm new to recording in general and am even newer to macs.
I have previously done some gentle recording and mixing/editing using maxix audio studio 7, but haven't done much else. I ordered the iBook 12" 1Ghz recently (had ordered the 800Mhz version last friday but thank god they had problems with my bank details so i'm getting the faster one!) When i get the iBook i would like to record a few demos with guitar and vocals. The guitar is hooked up to a line 6 pod 2.0 and we currently use a shure microphone (forgotten the exact model, it's the one everyone has for the vocals. Now the questions: 1) The vocals are fed through a Peavey power mixer, does this count as a 'preamp'? I'm assuming it does as the preamp is mainly to boost the microphone signal for recording, have i got this right? 2) What is the best solution for getting a line in connection to the ibook. I've seen products like the tascam u22 and the m-audio audiophile usb box, but they are all fairly expensive. Could i get away using something like griffin's iMic? Or can you recommend something up to $100? As for software, will Garageband be enough to get me started? I don't need a midi sequencer (never bothered with midi...) just something simple to record and do a bit of basic editing/mixing. 3) I'm going to be using shure e3c in ear monitors, anything i should beware of when mixing with headphones and not speakers? 4) Can i use the compressor/limiter in the line 6 pod 2.0 (designed for guitars) to compress vocals? Any other pointers would be gratefully recieved!!! Thanks apt |
|
|
Réponse(s)
jeu. 22 avril 2004, 09:32
Message
#2
|
|
Senior Member Groupe : Members Messages : 265 Inscrit : 05 déc. 03 Lieu : Memphis - US Membre no 30,424 |
with the tascam us-122 you would not need to use the peavey as a preamp. it has preamps built into the the unit. it also has phantom power (not needed by the dynamic shure you are using) for condensor mics.
you were asking about a compressor. the tascam us-122 has inserts for each of the two channels. you would plug the line out of the Line 6 guitar unit into a channel on the tascam, and us a tip/ring cable to plug the condensor into the insert of the channel you are wanting to compress on the tascam us-122. how that does not sound to confusing. happy recording, editbrain Ce message a été modifié par editbrain - jeu. 22 avril 2004, 09:33. |
|
|
Les messages de ce sujet
aptmunich Help Me Get Set-up mer. 21 avril 2004, 14:55
aptmunich QUOTE with the tascam us-122 you would not need to... jeu. 22 avril 2004, 09:56
editbrain i am using it now. 10.3 with tascam us-122. just... jeu. 22 avril 2004, 17:33
aptmunich Well i use Shure e3c's with my pc at the momen... sam. 24 avril 2004, 13:13
editbrain don't short change yourself with something lik... sam. 24 avril 2004, 14:40
aptmunich Ok i think i get the message But can't i jus... sam. 24 avril 2004, 14:59
editbrain you could i suppose, but your limited to an 1/8 in... sam. 24 avril 2004, 15:44
aptmunich QUOTE with the tascam us-122 you would not need to... jeu. 22 avril 2004, 09:56
editbrain i am using it now. 10.3 with tascam us-122. just... jeu. 22 avril 2004, 17:33
aptmunich Well i use Shure e3c's with my pc at the momen... sam. 24 avril 2004, 13:13
editbrain don't short change yourself with something lik... sam. 24 avril 2004, 14:40
aptmunich Ok i think i get the message But can't i jus... sam. 24 avril 2004, 14:59
editbrain you could i suppose, but your limited to an 1/8 in... sam. 24 avril 2004, 15:44
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :