MacMusic.org  |  PcMusic.org  |  440Software  |  440Forums.com  |  440Tv  |  Zicos.com  |  AudioLexic.org
Loading... visiteurs connectés
Bienvenue invité
> Fw 410 Sw Rtn Control Panel Issue, M-Audio Firewire 410 Control Interface
sethjacquay
posté mer. 18 févr. 2004, 15:54
Message #1


Member
**

Groupe : Members
Messages : 92
Inscrit : 05 févr. 04
Lieu : Philadelphia - US
Membre no 35,039




I am having a problem with my M-Audio Firewire 410, it
could be due to my lack of knowledge, but I am in
need of major assistance. So if anyone could help me
it would be much appreciated.

I had some how set my FW 410 up so that it had a software return
going through 1/2, but last night I decided that I would
play around with it and see if I could get the software
returns to go through both 1/2 and 3/4.

Like a moron I didn't save my current setup.

At anyrate, I hit the RESET button on the control panel/interface
and now I can't figure out how to get any of the software returns working.

The unit appears to be working fine and I can route the analog inputs to
all the output channels 1/2,3/4,5/6, and 7/8 but the software returns
aren't getting activated. The manual is a piece of crap, and I emailed
M-Audio support, but it could be a couple of days before they respond.

1. So can anyone tell me with certainty how to activate the software returns
from the control interface?

2. What are the Aux L/R Send knobs at the top of the each output
and software return in the control interface? And what do they do?

3. Considering that I have clicked and turned everything in almost
every conceivable way in the control interface, would it help if I
turned the FW410 off, uninstalled the driver, then reinstalled and
rebooted?

4. Has anyone had any similar issues? Would anything interfere
with the software returns. Say a USB device?

My computer is working great and the
FW410 is receiving input and output properly.

iMac G4 800 Mhz Flat Panel, 512 RAM, and external 7200 RPM 120GB HD.
Mac OS 10.3.2, Live 3, Garageband, and Soundtrack.

Let me know if you have any information that could be of assistance.


--------------------
Ableton Live 4.1
Reason 3
Mac OS 10.3.8
G5 Dual 1.8 Ghz 2 GB RAM 160 HD
EzQuest 120 GB 7200 Firewire HD
EzQuest 200 GB 7200 Firewire HD - Pro Audio
M-Audio Firewire 410 (driver 1.4.3)
Behringer B1 Microphone (2x)
Behringer HPS3000 Headphones
Yamaha DX-11 going through a MidiMate XP (Midi to USB adapter)
Go to the top of the page
 
+Quote Post
 
Start new topic
Réponse(s)
sethjacquay
posté mer. 18 févr. 2004, 20:22
Message #2


Member
**

Groupe : Members
Messages : 92
Inscrit : 05 févr. 04
Lieu : Philadelphia - US
Membre no 35,039




Okay, after reading the manual throughly and with an un-angered mind.
It appears that all of this was due to my lack of knowledge.

Not that the control interface isn't a little confusing or the
manual written in a rather awkward style, but my whole concept
of what Software Returns are seems to be incorrect.

Apparently the software returns are RETURNING the sound from
the open Software Music Application back to the FW410.
I was so fixated on getting them to work first without any
music apps open and this is why they probably weren't working.

Tonight I will test my new found knowledge.

Reading the manual, at the very least, sort of cleared up
my concept of what the FW410 is supposed to be doing.


--------------------
Ableton Live 4.1
Reason 3
Mac OS 10.3.8
G5 Dual 1.8 Ghz 2 GB RAM 160 HD
EzQuest 120 GB 7200 Firewire HD
EzQuest 200 GB 7200 Firewire HD - Pro Audio
M-Audio Firewire 410 (driver 1.4.3)
Behringer B1 Microphone (2x)
Behringer HPS3000 Headphones
Yamaha DX-11 going through a MidiMate XP (Midi to USB adapter)
Go to the top of the page
 
+Quote Post

Les messages de ce sujet


Reply to this topicStart new topic
1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s) :

 

Version bas débit - lundi 23 déc. 2024, 07:06
- © MacMusic 1997-2008